Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Installation Across Parlier
A new driveway gate in Parlier typically runs $1,800 to $6,500 installed, with wide double-swing farm gates and solar-powered automatic systems at the upper end. Most installations are completed within one to three days once materials are on site, and you’ll have a written price before any work begins. Our team works on Gate Installation projects across Parlier every week, from chain-link pedestrian gates on older lots to 16-foot pipe gates on ranch roads.
We know that a gate out here isn’t just curb appeal. It’s how you keep a dog in the yard, keep dust from blowing straight up the driveway, and get a tractor through without stopping twice. If you’re thinking about a new gate in Parlier, call (559) 785-2501 and we’ll walk you through what makes sense for your property.
Why Latch and Post Gate Repair Fresno Is Parlier’s Preferred Gate Installation Company
We’ve spent years working on the specific gate problems that show up around Parlier. The sandy soil along Manning Avenue and the rural roads heading east means hinge posts shift. The sun bakes powder coating off faster than anyone expects. And the fine dust that settles over everything in the summer works its way into rollers and operator tracks. A technician who only installs gates in paved subdivisions won’t recognize those failure patterns the way we do.
Every Parlier job starts the same way: a written price before work starts, shoe covers and drop cloths whenever we step inside your home, and a photo of the cleanup before we leave. That’s the Cedarwell Care Promise, and it’s not an upsell. It’s just how our technicians work. Cody Beckman and the rest of the team answer calls live around the clock too, so when a gate jams at 6 a.m. before the crew heads to the vineyard, you reach a person, not a voicemail.
Because scheduling and dispatch are coordinated from our Fresno-based Central Valley office, we can route a Parlier technician quickly without the overhead of a big national franchise. The people showing up at your property know the difference between a gate that sags because of sandy soil and one that sags because the welds failed. That local knowledge is the reason Parlier homeowners keep our number.
Styles & brands we work with
Gate Fabrication in Parlier
Gate fabrication means building a gate to the exact width, height, and duty cycle your Parlier property actually needs, rather than pulling a stock size from a catalog and hoping it fits. We fabricate custom steel frames for double-swing pipe gates, sliding gates, and pedestrian entry gates, then fit them with the hinges, tracks, and hardware that match how the gate will be used.
Farm-Spec Double-Swing Gates
A double-swing pipe gate for tractor access often runs $2,200 to $4,800 in Parlier depending on width, height, and whether it’s powder-coated or left with galvanized finish. We weld the frame so each leaf carries its own weight without bowing, and we set hinge posts deeper than residential standard because sandy soil here shifts.
Sliding Gates for Long Driveways
When a driveway slopes or a swing gate would block traffic on a narrow rural road, a fabricated slide gate makes more sense. These typically run $2,800 to $6,500 in Parlier, depending on span and automation. The rack and pinion drive gets covered to keep farmland dust out of the teeth, which extends the life of the operator noticeably.
Automatic Gate Installation in Parlier
Automatic gate installation puts a motorized operator on a new or existing gate so you can open it from the truck, the tractor, or inside the house. Most Parlier properties need a solar-powered operator because running conduit to the end of a 300-foot driveway costs more than the operator itself.
Solar Operators for Rural Lots
A solar-powered automatic gate operator for a standard driveway gate runs $1,400 to $3,200 installed in Parlier. We size the panel and battery for the actual gate weight and daily open cycles, then account for winter fog and the dusty coating that settles on panels between rains. Undersized panels are the most common reason automatic gates fail out here.
Loop Detectors and Entry Keypads
Loop detectors starting at $350 let a gate open automatically when a vehicle pulls up, which matters when your hands are full of feed buckets or steering a trailer. Keypad entry runs $250 to $600 installed. You get a written price for the full package, including the power run, the safety edges, and the receiver, before anything gets bolted down.
Trusted Brands We Service in Parlier
We’re factory-trained on the operators Parlier homeowners and farm operators actually run: LiftMaster for most residential and light-commercial gates, Mighty Mule for budget-conscious solar setups, Elite and FAAC for heavy-duty and commercial-weight gates. We stock common boards, remotes, and replacement arms locally, which means a failed operator on a Saturday doesn’t mean waiting a week for a part to ship. The right brand for your gate depends on weight, span, cycle count, and whether the operator sits exposed to Parlier’s dust and sun.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Installation Problems We See in Parlier Homes
- Shifted hinge posts in sandy soil. Summer wind gusts push swing gates hard, and shallow footings creep sideways until the gate drags on the ground. We pour footings deeper than residential standard and add diagonal bracing where posts meet the frame.
- Undersized solar panels covered in farmland dust. A panel sized exactly to the operator’s draw works fine until two weeks of dust lowers output by 15%. We oversize the panel and angle it so rain can rinse the face.
- Slide gates grinding because racks weren’t aligned to non-standard chain-link posts. Older Parlier fences often have post spacing that doesn’t match the rack sections. Correcting the rail alignment before mounting the operator spares the drive gear.
- Livestock pressure on welded wire panels. Goats and cattle lean on gates until welds pop. For farm properties, we weld the panel to a full perimeter frame instead of tacking it at the corners.
Pricing for Gate Installation in Parlier, CA
Here are the ranges we quote most often across Parlier:
- Pedestrian gate with chain-link or welded wire panel: $400 – $900
- Standard steel driveway gate, single swing: $1,800 – $3,400
- Double-swing pipe gate for farm or equipment access: $2,200 – $4,800
- Slide gate, rack and pinion, for wider driveways: $2,800 – $6,500
- Solar automatic operator added to a new or existing gate: $1,400 – $3,200
What changes the price most is gate width, whether the operator is solar or wired, and whether we’re correcting a post or footing problem before the new gate goes on. You’ll see the exact number in writing before any work starts, and that price won’t change unless you ask for something different. Call (559) 785-2501 for a free estimate at your Parlier property.
We Also Serve Cities Near Parlier
Our Gate Installation in Parlier service area also covers nearby communities including Selma, Reedley, Kingsburg, and Fowler. If your property sits just outside Parlier proper, give us a call and we’ll confirm dispatch times.
Serving Parlier, CA - Our Local Coverage Area
We’re based in the Parlier area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Parlier
Because running electrical conduit from the house to a gate 200 or 500 feet down a ranch driveway is expensive, often $3,000 or more just for the trench and wire. Solar operators cost less to install and work reliably on Parlier’s open properties as long as the panel and battery are sized correctly. We factor in dust buildup and winter fog when we spec the system. Call (559) 785-2501 and we’ll price both options for your gate.
We size the operator by gate weight and daily open cycles, not just width. A 16-foot double-swing pipe gate with welded wire panels can weigh 500 to 800 pounds per leaf, which puts it past the limit of most residential operators. We spec a heavy-duty operator with a low-speed, high-torque drive and batteries sized for at least 15 open-close cycles per day without solar assist. Getting the number right the first time means the motor isn’t stalling when a loaded trailer is waiting. Call for an exact recommendation for your gate.
The fine dust from surrounding farmland works into the roller channels and packs into the bearings, especially on the unpaved roads east of town. We install sealed-bearing rollers and add a cover to the track that keeps the worst of the dust off the rolling surface. On new installations, we also set the track with proper drainage so windblown dirt doesn’t build up in the rail. A sealed roller set costs about $120 to $250 per gate and pays for itself in avoided service calls.
Yes, and we often do for horse and cattle properties where a top rail invites climbing and catch hazards. The gate gets a full perimeter frame instead, and the welded wire panel is attached at close intervals so it holds its shape even when livestock push against it. A 12-foot welded wire gate on a steel frame without a top rail typically runs $900 to $1,800 in Parlier depending on height and pierce spacing. Call us to measure your opening and we’ll give a written price.
Not always, but on farm properties we strongly recommend a loop detector because it opens the gate automatically when a vehicle or tractor leaves the property, which keeps you from climbing out at every crossing. A keypad entry is common on Parlier installations too, especially when farm workers or family members need access without carrying a remote. The loop detector starts around $350 installed and the keypad around $250. We’ll explain which options make sense for your gate pattern when we come out for the free estimate.
If you need a new gate in Parlier, call (559) 785-2501 for a free estimate. We’ll come out, measure the opening, check the soil and the power situation, and hand you a written price before you commit to anything.
Written by Cody Beckman, Owner at Latch and Post Gate Repair Fresno, serving Parlier and the Central Valley since 2009.