Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Gate Repair for Fresno Homeowners
When a gate stops latching in Fresno, it usually comes down to one of two things: the latch that holds it or the post that carries it. That’s the job we focus on at Latch and Post Gate Repair Fresno. We’ve been repairing gates in the San Joaquin Valley since 2009, and our lead technician, Cody Beckman, has seen just about every failure mode the Fresno climate can throw at a gate – from sun-baked hinges in Woodward Park to rusted tracks in the Tower District. Most gate repairs in Fresno run between $145 and $485, and you’ll always see the exact price in writing before we lift a tool. Need help now? Call (559) 785-2501 – a live person answers around the clock.
Driveway Gate Repair
Driveway Gate Repair is the work of bringing a gate back to smooth, safe operation – whether it’s a sliding panel that drags on its track, a swing gate that sags at the hinges, or a keypad that no longer triggers the operator. It’s not always the motor. Often the trouble is mechanical: a bent roller, a worn hinge bushing, or a latch that needs Lock Repair to realign. Fresno’s heat and valley dust get into every moving part, and when those parts fail, the gate either won’t move or moves badly enough to damage the operator. We diagnose the whole assembly, not just the symptom, so the fix holds through the next hundred-degree summer.
Common Driveway Failures
We see misaligned photo eye sensors a lot – a bump from a car or a sprinkler jolt knocks them out of line and the gate reverses constantly. We also see chain-drive operators where the chain has stretched and needs tensioning or replacement. Both are fast, affordable repairs when caught early.
Repair, Not Replace
We’re not trying to sell you a new gate. If the post is still sound and the panel isn’t cracked through, we’ll say so and fix what’s broken. Most driveway gate repairs in Fresno fall between $165 and $420, parts included, and the written quote you get before we begin is the number you pay.
Styles & brands we work with
Gate Welding
Gate Welding is the repair of cracks, breaks, and fatigue points in steel and iron gates using proper MIG or stick welding, not a quick adhesive patch or a bolt-on plate that rusts out in two seasons. Fresno’s temperature swings put real stress on welded joints, especially at corners and hinge mounts. A hairline crack widens with every open and close cycle, and eventually the gate binds or a section separates. We grind back to clean metal, weld the joint properly, and re-paint or prime so the repair blends in.
Hinge and Latch Reinforcing
The most common welding job we do is re-welding a broken hinge barrel or a latch strike that’s cracked off the post. On older ornamental gates in Fresno’s historic neighborhoods, we match the weld profile so the repair doesn’t stand out against the original ironwork.
When Welding Beats Replacing
If the rest of the gate frame is sound, a quality weld is often a $180 to $340 job that keeps a gate in service for years more. We weld on-site when we can, which saves you the cost and disruption of removing the gate. Every weld is done by a trained technician – never an apprentice practicing on your gate.
Commercial Gate Repair
Commercial Gate Repair is the service of restoring access-control gates on apartment complexes, warehouses, self-storage facilities, and business lots to reliable, code-compliant operation. These gates cycle dozens or hundreds of times a day, which is a completely different duty cycle than residential use. When they fail, tenants can’t get in, deliveries stall, and the property office gets called. We stock the parts that commercial systems actually use on the brands we’re factory-trained for: FAAC, LiftMaster, DoorKing, and Linear. And we know that a commercial gate that won’t close is a liability, not just an inconvenience for the property manager.
High-Cycle Component Replacement
Commercial operators need limit switches, relays, and rollers replaced on a schedule, not just when they break. We’ll tell you what’s wearing out before it fails and what it will cost to fix it now versus after it takes down the gate during business hours.
Minimal Downtime
We schedule commercial work around your traffic pattern – meaning we work the low-use hours or get a temporary solution in place while parts are sourced. Commercial gate repair in the Fresno area typically runs $240 to $690 depending on the operator and the damage.
Iron Gate Repair
Iron Gate Repair is the restoration of solid, often decorative, iron gates to proper alignment and smooth swing. Iron gates are heavy, and their weight works against the hinges and posts over time, which is why Hinge & Post Repair is so often needed. In Fresno’s older neighborhoods like the Tower District and Old Fig Garden, we see gates that have been hanging for forty or fifty years, with hinge pins worn oval and latch strikes pounded out of shape. We re-align the gate, machine or replace the hinge components, and adjust the latch so the gate swings true and latches with a solid click – not a rattle.
Rust and Rotation
Fresno’s dry air slows rust compared to coastal California, but any gate that gets hit by sprinklers will bloom rust fast. We treat surface rust, repair what it’s weakened, and re-seal. We also check the post plumb – an iron gate’s weight can rotate a post slowly over years.
Latch Rebuilds on Iron Gates
A sagging iron gate shears latch hardware. The fix is usually to lift and perform Gate Realignment first, then rebuild or replace the latch – not just screw on a new strike plate. Most iron gate repairs in Fresno fall between $175 and $390.
Sliding Gate Repair
Sliding Gate Repair is the repair of cantilever, track-riding, and V-groove sliding gates – the kind that move sideways instead of swinging. In Fresno, many homes and businesses use sliding gates to save driveway space, and they fail differently than swing gates. Rollers wear flat, tracks fill with dirt and gravel from the yard, the chain loses tension, and the gate starts to shimmy and bind. We clean and repair the track, replace worn rollers or guides, and adjust the operator so the gate travels smoothly and stops where it should.
Track and Roller Wear
The most common repair we do on sliders is replacing flat-spotted or seized rollers and clearing a track clogged with valley dust and landscaping debris. If the track itself is bent or has pulled loose from the concrete, we re-seat it so the gate runs true again.
Chain and Operator Adjustment
A loose chain makes the gate jerky and noisy, and it wears the sprocket fast. We’ll tension or replace the chain, set the limit switches, and make sure the operator isn’t working against a damaged wheel. Typical sliding gate repair in Fresno costs between $195 and $460.
Wrought Iron Gate Repair
Wrought Iron Gate Repair is the specialized repair of ornamental wrought iron gates, where the goal is to restore strength without wrecking the look. Many Fresno homes feature hand-worked wrought iron from the mid-century era, and owners want it preserved – not replaced with modern steel tube. We match repair parts and finishes as closely as practical, and when welding is needed, we do it cleanly and then paint or seal the repair. A broken scroll or a cracked picket doesn’t mean the gate has to go to the scrapyard.
Preserving Historic Work
We take care to match the color and texture of original paint, and we use weld beads and finishing techniques that sit low and tight to the original profile. The goal is a repair you can’t spot from five feet away.
Structural Repairs in Style
A wrought iron gate can look lovely while its bottom hinge rots out from sprinkler spray. We replace hinge ears and reinforcement plates where needed, then dress the repair to match. Expect most wrought iron gate repairs in Fresno to land between $185 and $430.
Metal Gate Repair
Metal Gate Repair is the broad category covering aluminum, steel, and tubular-frame gates – the practical, sun-tolerant gates that dominate newer Fresno subdivisions and commercial properties. Aluminum doesn’t rust, but it does oxidize, and its hardware does wear. Steel is strong, but if the powder coating is chipped, it will rust. The frame can also bow if the gate is dragged over a driveway that’s lifted from tree roots. We repair the gate, not just the hardware, and we always address why it failed in the first place.
Aluminum Gate Hardware
Aluminum gates are light, which means hinge and latch components take all the abuse. We replace worn hinge pins, rebuild sagging corners, and set the latch so it engages cleanly without slamming. When a gate doesn’t latch, it’s often because the aluminum frame has flexed, not because the latch broke.
Steel Frame Straightening
A bowed steel gate can sometimes be straightened in place with proper jigging and some careful persuasion. If the frame is cracked, a weld repair plus a touch-up of the coating is usually the right fix. Metal gate repair in Fresno typically runs $165 to $410.
Wood Gate Repair
Wood Gate Repair is the restoration of wooden gates – from simple redwood picket gates to heavier board-on-board and post-and-rail styles. Wood moves. Fresno’s dry heat shrinks it; winter rains swell it. The gate that closed fine in October may bind in February or sag in August. We fix the causes: we re-set posts that have shifted, re-hang gates that have sagged, and replace rot-damaged rails and pickets with material that matches as closely as we can source. And we treat the cut ends so the repair doesn’t rot out in two years.
Sagging Gate Repairs
The anti-sag kit is the classic homeowner attempt, but it puts constant tension on the frame and eventually pulls the hinges loose. The better fix is to re-set the post, re-hang the gate, and tighten the hardware. If the wood is too far gone for that, we’ll tell you honestly whether a new rail-and-picket section is the smarter spend.
Rot and Termite Assessment
Wood gates in Fresno can hide termite damage or dry rot where the gate meets the ground or where the post enters the soil. We’ll spot-check those areas and tell you what we find before recommending a repair plan. Most wood gate repairs in Fresno fall between $140 and $350.
See the difference
Before
After
Before
After
Before
AfterBrands We Service
Our team is factory-trained on the brands Fresno families actually have: LiftMaster, DoorKing, FAAC, BFT, Linear, Viking, Ghost Controls, Elite, and Mighty Mule. We stock OEM parts and sensors for the most common models, which means a first-visit fix instead of a diagnostic visit followed by a wait for parts. On a Viking operator, for example, we know the control board layout and common failure points without a learning curve.
If you have a FAAC hydraulic operator or a Linear actuator on a residential slider, we can diagnose and repair it without guessing. We respect that these systems keep your family and property safe, and we work on them accordingly. Whether you have a LiftMaster or a BFT or any other brand on our list, we can get your gate working right and back it with our 365-Day Done Right Promise.
Signs You Need a Pro Right Now
- The gate groans or shudders when it moves. That sound is metal dragging on metal, a failing roller, or a hinge that’s given up. Every cycle makes the damage worse and pushes the repair cost up.
- The latch no longer catches on the first try. A gate that won’t latch announces itself to every passerby. In Fresno, a gate that’s even slightly open is an invitation to the neighborhood for pets to wander and deliveries to walk right in.
- The gate reverses without reason or stops halfway. Often that’s a misaligned sensor eye or a limit switch that’s failing. The operator may be fine – but if you keep resetting the breaker, you’re asking the motor to fight a mechanical problem it can’t win.
- You can see daylight through a crack in the frame or post. A visible crack means the structure is failing. Welding or replacement is needed before the gate becomes too heavy for the operator and the hinges.
- Kids or pets can squeeze through the gap. A gate that’s drifted out of alignment leaves a gap that’s just big enough for a dog or a curious toddler. Call us at (559) 785-2501 before the gate becomes the reason you’re out searching the block.
Our Process, Step by Step
- 1
You call and talk to a real person. A live Latch and Post team member answers at (559) 785-2501, day or night. We ask what the gate is doing, what brand it is, and when the problem started. Then we set a visit window that works for your schedule – and we can schedule around nap time if quiet matters.
- 2
We arrive, introduce ourselves, and look first. Our technicians are background-checked and uniformed. Before we touch anything, we walk the gate with you and listen. We test the operator’s response, check the hinges and latch, and pull the cover off only after we’ve confirmed the mechanical basics.
- 3
You get a written price before any work begins. We explain what we found, what it costs to fix, and why. The price is on paper, it includes all labor, parts, and our clean-up, and it does not change unless you approve additional work in writing first. No pressure, no “while we’re here” surprises.
- 4
We do the repair and clean up like it’s our own home. We lay drop cloths on the floor and put on shoe covers before we step inside for keypad or opener work. We use pet-safe lubricants where there’s a choice. Before we leave, we take a photo of the clean-up and show it to you – that’s the Cedarwell C.A.R.E. standard in action: Clean up like it is our own home, Ask before we move or touch anything, Respect the family’s time and quiet hours, Explain the price before the work.
- 5
We test the gate with you and leave the paperwork. Together we cycle the gate several times, check the latch, and confirm the operator stops where it should. You’ll have a written summary of what was done, and every repair is covered by our 365-Day Done Right Promise. If it’s not right, we make it right – no argument, no fine print.
How Much Does Gate Repair Cost in Fresno?
In Fresno, a typical gate repair runs between $145 and $485. A simple latch replacement or hinge adjustment at a home near Woodward Park might run $145 to $190. A more involved job – like a bent sliding gate track, a failed operator control board, or a broken weld on an ornamental iron gate – lands between $240 and $485. Your written estimate will show the exact line-item cost before any work begins, because we price the job, not the house.
What moves the price? Parts, mainly. A replacement control board for a DoorKing or FAAC operator costs more than a set of hinge bushings. The weight of the gate matters, too: a heavy iron gate takes more time and more care to re-align than an aluminum one. And how far out the problem has progressed affects the labor. A gate caught early usually costs less to fix than one that’s been grinding for months.
How do you avoid overpaying? Ask for a written quote, and ask whether the quote includes the cleanup. Ours always does. Ask whether the technician will be the one doing the work or subbing it out. Our uniformed, background-checked techs do the work themselves. And ask about guarantees. Our 365-Day Done Right Promise covers every repair we make. A free estimate should include a diagnosis, not just a handshake. Call (559) 785-2501 and we’ll give you a straight price on the phone for common repairs, then confirm it in writing when we see the gate.
Our Service Area Near Fresno
Latch and Post Gate Repair Fresno serves homeowners and businesses throughout Fresno County and nearby, including homeowners in Clovis and Madera. We also regularly take calls from Sanger, Selma, Reedley, Kerman, Kingsburg, Fowler, Parlier, Dinuba, and Visalia. Most Fresno appointments can be scheduled within the same week, and for gates that won’t open or won’t close, we make emergency slots available when the family’s safety is on the line. If you’re near Gate Repair in Fresno neighborhoods like Fig Garden, Tower District, or Sunnyside, you’re within easy reach. We also serve Gate Repair in Clovis and Gate Repair in Madera with the same written-price, clean-work standard.
Serving Fresno, CA - Our Local Coverage Area
We’re based in the Fresno area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Gate Repair in Fresno
Gate repair is the correction of any fault that keeps a gate from swinging, sliding, latching, or operating as it should. It covers hinges, latches, posts, frames, tracks, rollers, operators, sensors, and keypads. At Latch and Post Automatic Gate Repair Fresno, we diagnose the whole assembly, not just the part that’s visibly broken, so the repair actually holds.
Most gate repairs we complete in Fresno take between one and three hours on site. Simple latch, hinge, or sensor fixes are often done in under an hour; a re-weld or track rebuild takes longer. We’ll give you a time estimate with your written quote, and we’ll call if anything changes once we’re inside the job.
Most Fresno gate repairs run between $145 and $485. The exact price depends on the part, the gate’s weight, and how long the problem has been worsening. You’ll see the exact number in writing before we begin, and that’s the number you pay. Call (559) 785-2501 for an exact quote – estimates are free.
Yes. We’re factory-trained on LiftMaster, DoorKing, FAAC, BFT, Linear, Viking, Ghost Controls, Elite, and Mighty Mule. We stock OEM parts for the common models so the right fix happens on the first visit, not after a parts-order delay.
Yes. A gate that won’t close leaves your family exposed, so we answer calls around the clock at (559) 785-2501. We’ll walk through what’s happening, tell you what’s safe to do in the meantime, and get a technician out to you as soon as we can.
Every repair and installation is covered by our 365-Day Done Right Promise. If the repair isn’t right within a year, we make it right – no argument, no fine print. That’s in addition to any manufacturer’s warranty on the parts we install.
If the gate is mechanical (non-electric), just make sure the path to the gate is clear and let us know where pets will be during the visit. For electric operators, leave the breaker as it is unless we’ve told you otherwise. We’ll handle the rest: drop cloths, shoe covers, and a photo of the clean-up before we go.
Schedule Your Gate Repair Service in Fresno Today
A gate that doesn’t latch, drags, or won’t open doesn’t fix itself – but it is fixable. Call Latch and Post Gate Repair Fresno at (559) 785-2501 for a free, no-obligation estimate. You’ll get a written price before any work starts and a 365-Day Done Right Promise on everything we repair. A live person answers around the clock.
Written by Cody Beckman, Owner at Latch and Post Gate Repair Fresno, serving Fresno since 2009.