Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Fresno
Most gate repairs in Fresno run between $180 and $650 depending on the failure, and our crews usually reach homes in the Tower District, Fig Garden, and Sunnyside the same day you call. We’re the Latch and Post Gate Repair Fresno team, part of the Cedarwell family of independent gate specialists. We focus on one trade: gates. Not fences, not general contracting. Gate repair, gate installation, and electric gate repair. If your sliding gate has seized up after a haboob or your ornamental iron swing gate is dragging across the concrete, call (559) 785-2501 and a live person answers, day or night.
Why Latch and Post Gate Repair Fresno Is Fresno’s Preferred Gate Repair Company
Fresno homeowners tend to be direct about what they want: a straight price, a technician who respects the house, and a fix that holds. That’s how we’ve built our reputation since 2009 as part of the Cedarwell family. We work on the brands families around here actually own: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. When a technician pulls up to a home off Blackstone or Palm, they already know what they’re likely to find before the hood comes off the operator.
Every visit starts with a written price before any work begins. No pressure, no vague “we’ll see when we get in there.” You’ll know the number. The technician lays drop cloths if the job takes us inside, puts on shoe covers at the door, and sends you a photo of the cleanup before leaving. It’s part of the Cedarwell C.A.R.E. routine we follow on every job: clean up like it’s our own home, ask before moving anything, respect quiet hours, and explain the price before the work. Cody Beckman, who leads our Fresno team, holds every technician to that standard.
Gate Repair is all we do, and in Fresno that means understanding flood irrigation, dust, and heat the way a local would. We don’t send a rotating cast of subcontractors. The person who answers the phone knows the service area, and the person who shows up is background-checked, uniformed, and factory-trained.
Styles & brands we work with
Sliding Gate Repair in Fresno
Sliding gate repair in Fresno usually comes down to three culprits: dust-packed tracks, burned-out operator gears, or wheels that have worn flat from years of rolling across concrete. The first sentence you probably care about: most sliding gate repairs here run $220 to $600, and you’ll see the exact figure in writing before we touch anything.
Dust and the Fresno Track
Fresno’s occasional haboobs and constant summer dust coat rack and pinion tracks with a fine grit that works into the gear teeth. Most national gate sites will tell you to clean the track. What they won’t tell you is that by the time you can hear the operator straining, the gear is often already half stripped. If the motor hums but the gate shudders or stalls, stop running it and call us. Running a stripped gear until it fails completely takes a $300 repair and turns it into an $800 operator replacement.
The Damage We Actually See
On a track gate along Herndon or Friant, the wheels wear unevenly because the concrete shifts with wet winters and 105°F summers. We replace the bad wheel, check the others, and re-square the gate so it rolls without dragging the chain. Then we run the full auto-close and safety reverse check so it meets UL 325 entrapment standards before we leave.
Wrought Iron Gate Repair in Fresno
Wrought iron gate repair in Fresno typically means a sagging leaf, a rust-through at the bottom rail, or a hinge post that has started to lean. But the first thing we check on any ornamental iron gate here is the pivot post base. In the Tower District especially, decades of flood irrigation have rusted the base of pivot posts on pre-war bungalow gates, so a gate that looks fine at eye level may be minutes from collapsing at the hinge post. Most wrought iron repairs run $180 to $450, and we quote it in writing before the first tool comes out.
The Flood Irrigation Problem
This is uniquely Fresno. Older neighborhoods built around flood irrigation keep the soil wet for days at a time. That constant moisture wicks up the steel post, and the point where the post meets the concrete footing rusts from the inside out. The gate still looks straight because the upper hinges are holding, but the base is nearly gone. We see this on single-swing gates along driveways in the Tower District and older pockets of Sunnyside where the chain-link fabric has been replaced twice and the post has never been touched.
What We Actually Do
We dig out the old footing, cut the rotted base, weld a new steel sleeve or set a fresh post in a new concrete pier, and re-hang the gate. If the gate itself is sound, that’s a repair, not a replacement. We reseal the base and add a drain path so water doesn’t pond against the steel. Then we re-align the latch so the gate closes without lifting.
Trusted Brands We Service in Fresno
We’re factory-trained on the equipment Fresno families actually have bolted to their driveways: LiftMaster, FAAC, Elite, Mighty Mule, and the other brands on our service list. That matters because gate operators are not interchangeable, and parts for a LiftMaster won’t fix a FAAC. We stock common boards, remotes, safety edges, and photocells locally, which means many repairs get done in one visit instead of waiting on a part from a warehouse in Texas. If you have a Ghost Controls arm on a solar gate in the county or a DoorKing ram on a commercial track near downtown, we can diagnose it accurately the first time.
Common Gate Repair Problems We See in Fresno Homes
- Rusted pivot posts from flood irrigation. In the Tower District and older Fresno neighborhoods, flood irrigation keeps soil wet for days. The base of steel pivot posts rusts from the inside, and the gate fails at the one point nobody looks.
- Sagging gates after wet winters. Fresno’s adobe clay swells when saturated, then contracts in summer. Hinge posts shift, gates bind, and solid ornamental panels that act like sails in spring wind pull posts further out of plumb.
- Overheated operators in summer. A 105°F day with direct sun on a dark steel operator housing will trip the thermal overload. When the motor cools, it works again, but repeated thermal trips shorten the motor’s life. We can relocate or shade a heat-prone operator.
- Dust-stripped sliding gate gears. Fresno windstorms push fine dust into rack and pinion tracks on sliding gates. The operator strains, the gear strips, and the gate stalls halfway. We clean the track, replace the gear, and add a dust shield where the exposure warrants it.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Fresno, CA
A gate latch or hinge repair in Fresno typically runs $180 to $340. A sliding gate track and gear job lands between $220 and $600. Electric operator board replacement runs $260 to $580, and a full operator swap starts around $700 and can climb to $1,500 for a premium LiftMaster or FAAC on a heavy iron gate. What moves the number: the weight of the gate, access to the post footing, and whether we’re reusing the existing operator or replacing it. You’ll get a written price before any work starts, every single time. No dispatch fee. No surprise invoice at the end. Call (559) 785-2501 for an exact quote, and the estimate is free.
We Also Serve Cities Near Fresno
Our crews cover Fresno and the surrounding Central Valley communities, including Clovis, Madera, Sanger, and Fowler. If you’re just outside the city and your gate won’t open, call us. If it’s outside our range, we’ll tell you straight instead of stringing you along.
Serving Fresno, CA - Our Local Coverage Area
We’re based in the Fresno area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Fresno
The storm likely saturated the adobe clay around your hinge post, which made the footing shift under the extra wind load on the solid gate panel. Fresno’s clay swells when wet, and a solid iron gate in gusty spring wind acts like a sail. The fix is usually digging out the old footing, pouring a new concrete pier, and re-setting the post. Call (559) 785-2501 and we’ll quote the exact repair before we start.
Every automatic gate operator has a manual release mechanism, usually a key, a pull cord, or a lever on the operator housing. Releases vary by brand: LiftMaster uses a keyed release, FAAC uses a pull knob, and Mighty Mule uses a release lever on the arm. We’ll walk you through it over the phone. Do not force the gate open against the operator, and do not try to open a heavy iron gate alone if the wind is pushing it. Call (559) 785-2501 any time, and a live person will talk you through the exact release for your operator.
Yes. Fine dust from Fresno’s wind events gets into the rack and pinion track on sliding gates and the screw drive on older operators. It acts like sandpaper on metal parts and strips gears faster than normal wear. If you hear a grinding or straining sound after a haboob, stop running the gate. A cleaning and gear inspection now costs far less than a full operator replacement later. Call (559) 785-2501 for a free estimate.
Not always. A cracked keypad housing lets dust and moisture reach the circuit board underneath, and moisture plus dust means a shorted board. Fresno’s UV also embrittles the plastic buttons until they stop registering presses. If the keypad is cracking, replace the housing and weather seal before the board fails. It’s a quick, inexpensive fix. Call (559) 785-2501 and we’ll quote the replacement in writing before we start.
Metal expands in prolonged heat. A black iron gate that reads 140°F on a summer afternoon grows just enough to close the clearance at the latch and hinge line. If the gate was installed with tight tolerances, it binds during peak heat and frees up at night. We can re-align the hinges and latch so the gate swings clean regardless of the temperature. Call (559) 785-2501 and we’ll fix it.
Call Latch and Post Gate Repair Fresno
If your gate is sagging, stuck, grinding, or won’t open, call (559) 785-2501. A live person answers around the clock. We’ll walk through what’s wrong, give you a written price before any work starts, and send a background-checked, uniformed technician who will treat your home like their own. Shoe covers on, drop cloths down, cleanup photo before we leave. That’s just how we work in Fresno.
Written by Cody Beckman, Owner at Latch and Post Gate Repair Fresno, part of the Cedarwell family of independent gate specialists.