Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Fresno, CA
We’re Latch & Post Gate Repair, a Cedarwell gate specialist serving Fresno homeowners. Gates in Fresno deal with a punishing combination of 100°F summers, valley dust, and stucco-and-iron construction that no other climate quite matches. The result is a specific set of repairs: overheated opener motors, dry hinges, rusted pivot posts, and sun-cracked keypads. Whether you need a latch replaced on a Tower District bungalow gate or a full iron driveway gate in Fig Garden, you’ll get a written price before we touch anything. Call us at (559) 785-2501 and a live person answers.
Why Fresno Homes Are Different
Fresno’s housing stock tells a particular story. In established neighborhoods like Fig Garden and Sunnyside, custom ornamental iron and steel driveway gates sit on stucco or brick pillars, many of them paired with automatic openers installed when the homes were built. Those openers weren’t made for summers like ours. Heat builds up inside the motor housing, lubricants thin out and dry, and metal expands enough to bind against the gate frame. We see it every July and August.
Dust is the quieter problem. Valley dust storms and just the everyday fine particulate that settles over everything work their way into hinges, rollers, and gear tracks. It grinds. It slows the gate. It causes sensors to misread. Then there’s the Tower District issue we’ve learned to look for first: pre-war bungalows with narrow single-swing driveway gates and pivot posts rusted at the base from decades of flood irrigation. The gate looks fine from the top. The post is failing from underneath. That’s the kind of thing you only catch when you’ve worked on enough Fresno gates to know where to look.
Styles & brands we work with
Our Main Fresno Services
Most Fresno calls come to us for one of three reasons, and each has its own dedicated page with full pricing and details.
Gate Repair in Fresno
A sagging gate on a Fig Garden driveway almost always comes down to one of two things: worn hinges or a post that’s started to lean. We replace the hardware, true the post when we can, and adjust the gate so it closes the way it did when it was new. Dust-accelerated hinge wear is common across Fresno, and so is a latch that no longer catches because the gate shifted over years of dry summers. Read the full breakdown on Gate Repair in Fresno.
Gate Installation in Fresno
New installations in Fresno need hardware that can take the heat and the dust. We install driveway gates on stucco and brick pillars, set posts in concrete with proper depth, and size the gate for the opening rather than forcing a standard panel into a driveway that’s settled over the years. We bring samples of iron and steel options and give you a written price before any order is placed. See Gate Installation in Fresno for what a full install includes.
Electric Gate Repair in Fresno
Automatic openers fail in Fresno more from heat than from anything mechanical. A motor that overheats on a 106° afternoon may run fine the next morning, which is why intermittent failures here are rarely the motor itself. We check the gear track, the capacitor, the sensor alignment, and the condition of the plastic covers that the sun has been cracking for years. Details are on Electric Gate Repair in Fresno.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Fresno
Our technicians are factory-trained on the brands Fresno families actually have on their gates: LiftMaster, FAAC, Elite, and Mighty Mule among them. We stock common replacement parts locally, which means most repairs don’t need a second visit. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Fresno, CA
| Service | Typical range in Fresno |
|---|---|
| Gate latch replacement | $95 – $185 |
| Hinge replacement (pair) | $140 – $260 |
| Gate alignment and adjustment | $120 – $220 |
| Post reset (lean correction) | $350 – $700 |
| Chain-link fabric replacement | $280 – $550 |
| Single driveway gate installation | $1,400 – $2,800 |
| Double driveway gate installation | $2,800 – $5,500 |
| Opener motor replacement | $450 – $900 |
| Keypad or receiver replacement | $180 – $380 |
| Sensor realignment or replacement | $150 – $320 |
What pushes price up in Fresno is usually what’s underneath: rusted pivot posts in flood-irrigated Tower District lots, gates mounted on cracked stucco pillars that need reinforcement, or opener failures from heat that end up requiring a full motor replacement rather than a repair. Whatever the number, you see a written price before any work starts. No surprises, no pressure.
Neighborhoods We Serve in Fresno
We work across Fresno, from the pre-war bungalows of the Tower District to the larger estate driveways in Fig Garden and the mid-century homes of Sunnyside. Our scheduling covers the whole valley side of the city, and we usually reach most Fresno neighborhoods the same day a call comes in.
- Tower District
- Fig Garden
- Sunnyside
- Woodward Park
- Clovis East
Service Area – Cities Near Fresno
Beyond Fresno, our crews also serve the surrounding Central Valley communities. We’re regularly in Clovis, CA, Madera, CA, Sanger, CA, and Fowler, CA, with scheduling coordinated from our Fresno office.
Serving Fresno, CA - Our Local Coverage Area
We’re based in the Fresno area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Fresno
In most cases, same-day. Fresno’s geography means we can cross the city quickly, so a gate problem reported in the morning is often scheduled for early afternoon. If your gate won’t close at all, tell the person who answers the phone and we’ll prioritize it. Call (559) 785-2501 for a current time window.
That depends on the neighborhood. Parts of Fresno, especially some newer developments and some Fig Garden streets, have HOA review requirements for gate changes. For repairs that match the existing gate, approval is rarely needed. For a full installation, check with your HOA first. We’ll give you the measurements and details for the application.
Yes, every time. Our technicians wear shoe covers and lay down drop cloths before stepping inside a Fresno home, and you’ll get a photo of the clean-up before they leave. That’s part of the Cedarwell Care Promise, not an add-on. If your kids are napping during the visit, let us know and we’ll work quietly.
If your Fresno gate needs attention, call (559) 785-2501. You’ll get a live person, a straight answer, and a written price before any work begins.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Fresno Customers Say
"Installed a new gate motor and remotes. Respectful crew, protected the driveway, and cleaned up every bit of welding debris. Walked me through the new setup patiently."
- Nick Farrow"Good repair on a sagging gate. Part for the older motor took a few days, so two trips, but they explained it and were tidy and polite each time. Gate works smoothly now."
- Carmen Ulloa"Gate motor died and they replaced it carefully, cleaning every bit of debris off the driveway. Mindful not to leave the yard open with our dog out. Great crew."
- Benson Ide