Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Clovis, CA
Gate repair in Clovis means working on equipment that has spent years under a hard Central Valley sun, with dust from surrounding farmland working into every chain, hinge, and sensor. We see everything from mid-century wooden gates settling into older post footings near Old Town to newer automated driveway gates in neighborhoods like Harlan Ranch where stucco and tile bounce heat directly onto the operator. Most gate repairs in Clovis run between $129 and $950 depending on what failed, and we quote every job in writing before we touch anything. Call (559) 785-2501 when your gate stops doing its job.
Why Clovis Homes Are Different
Clovis grew from a railroad town into a wide, sprawling suburb faster than most cities in the Valley, and that pace shows up in the gates themselves. In the 1950s and 60s ranch homes around Old Town Clovis, gates were usually custom-built from wood, with post footings dug by hand and hardware that was never designed for a hundred degree summers. Those gates hold up surprisingly well, but the posts eventually lean and the hinges pull loose with the same gradual rhythm as the soil shifting under them.
In the newer subdivisions east of Clovis Avenue, like Harlan Ranch, the gates are often decorative wrought iron or powder-coated steel installed by the builder. They look sharp on day one. What they are not built for is the daily process of metal expanding under triple-digit heat and contracting each night. Powder coating chalks and fades faster here than in coastal cities. Operators sit inside metal housings that act like ovens in July. And the dust, carried off farmland by afternoon breezes, will coat a chain drive within a single dry season and start grinding it down. Our technicians adjust for all of that because they work in it every week.
Styles & brands we work with
Our Main Clovis Services
Most Clovis homeowners call us for one of three things: a gate that won’t open or close, a new gate and opener for a driveway or courtyard, or an electric operator that has stopped responding. Each one has its own Clovis page below so you can get direct answers instead of a generic tour of our website.
Gate Repair in Clovis
When a gate drags on the concrete or swings crooked off its hinges in Clovis, the cause is usually one of three things: a post that has shifted, a hinge that has worn out, or a latch that no longer lines up with its strike. Wooden gates from the 1950s and 60s near Old Town often hide dry rot inside the post where sprinklers have been hitting it for forty years. Metal gates in Harlan Ranch tend to fail differently, with weld points cracking from daily expansion and contraction. We repair both, and we often finish a standard hinge or latch replacement the same day. Read the full breakdown on our Gate Repair in Clovis page.
Gate Installation in Clovis
A new gate in Clovis has to be chosen for the climate, not just the color of the house. Powder-coated steel that looks great in a coastal catalog will chalk and fade faster here under months of unrelenting sun, so we steer homeowners toward finishes that hold up in Valley heat. We also set posts deep enough to stay true through wet winters and dry summers, using concrete mixed for the soil type in each part of town. Every installation includes a written price before any work begins. Details are on our Gate Installation in Clovis page.
Electric Gate Repair in Clovis
Electric gate problems in Clovis follow a pattern. In the summer, control boards fail in the heat, especially in east Clovis where monsoonal thunderstorms send surges through low-voltage landscape wiring that is rarely grounded the way it should be. In the spring and fall, dust clogs photo-eye sensors and chain drives. We can diagnose most of these issues quickly because our technicians are factory-trained on the brands families actually own, including LiftMaster, FAAC, and Mighty Mule. The page to read is Electric Gate Repair in Clovis.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Clovis
We work on LiftMaster, FAAC, Mighty Mule, and Elite, plus most other major operator brands you’ll find on Clovis gates. Our trucks carry common parts for these systems, which means a typical operator or sensor replacement can happen in one visit. For less common components we order directly from the manufacturer. See our brands page for details.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Clovis, CA
| Service | Typical range in Clovis |
|---|---|
| Gate latch replacement | $90 – $180 |
| Hinge replacement (metal or wood) | $80 – $180 |
| Post reinforcement | $250 – $650 |
| Full gate repair (major damage) | $350 – $950 |
| Gate operator replacement | $750 – $1,850 |
| Control board replacement | $350 – $800 |
| Photo-eye sensor replacement | $110 – $190 |
| Remote repair / replacement | $70 – $250 |
| Standard single-swing gate | $800 – $1,800 |
| Standard double-swing driveway gate | $1,500 – $3,000 |
| Decorative metal driveway gate | $1,800 – $4,500 |
| Wooden driveway gate | $900 – $2,500 |
What pushes a Clovis job toward the top of these ranges is usually access and existing damage: a post set in hardpan takes longer to dig, and a gate that has been forcing itself open for months has probably damaged the operator as well as the hinge. You will always see a written price before any work starts, and that is the price you pay.
Neighborhoods We Serve in Clovis
We run jobs across Clovis every week, from the older streets around Old Town to the newer tract communities east of Clovis Avenue. Most neighborhoods we can reach the same day a call comes in.
- Harlan Ranch
- Old Town Clovis
- Buchanan Estates
- Thompson Park area
- Deauville Estates
Service Area – Cities Near Clovis
We also serve nearby communities, so if you’re just outside Clovis, there’s a good chance we already work in your area. Our neighbors in Fresno, CA, Sanger, CA, Fowler, CA, and Madera, CA call us for the same gates, openers, and control boards, and we schedule those jobs from our Central Valley office.
Serving Clovis, CA - Our Local Coverage Area
We’re based in the Clovis area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Clovis
In most Clovis neighborhoods we can schedule a repair the same day you call, or the next morning at the latest. Someone answers our phone around the clock, and once we know what is wrong we give you a straight answer on timing before you commit to anything.
Many of the planned communities around Clovis do require design review for fence or gate changes, especially for driveway gates facing the street. We don’t file HOA paperwork, but we always note the community you live in and flag it before we start a quote. A quick call to your management company clears up most questions in one afternoon.
Every quote comes to you in writing before any work begins, and it includes the parts, labor, and any cleanup involved. We put down drop cloths inside the house and wear shoe covers, and we send a photo of the clean-up before we leave. The number you approve is the number on the final invoice. Call (559) 785-2501 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Clovis Customers Say
"Installed a new gate motor and remotes. Respectful crew, protected the driveway, and cleaned up every bit of welding debris. Walked me through the new setup patiently."
- Nick Farrow"Good repair on a sagging gate. Part for the older motor took a few days, so two trips, but they explained it and were tidy and polite each time. Gate works smoothly now."
- Carmen Ulloa"Gate motor died and they replaced it carefully, cleaning every bit of debris off the driveway. Mindful not to leave the yard open with our dog out. Great crew."
- Benson Ide