Gate Repair in Clovis - Same-Day Repair, Priced Before We Start

Fast, Reliable Gate Repair Across Clovis

Gate repair in Clovis usually costs between $145 and $420 for common fixes like hinge replacement, realignment, or control board swaps, and most jobs are finished the same day. We work on the gates Clovis families actually have: wrought-iron driveway gates in Harlan Ranch, the wooden courtyard gates near Old Town, and the automatic openers that keep kids and dogs safely in the yard. Our crews reach every Clovis neighborhood quickly, and we bring the parts, the tools, and a written price before anything gets unbolted. Call (559) 785-2501 for a free estimate and a straight answer.

Call (559) 785-2501

Why Latch and Post Gate Repair Fresno Is Clovis’s Preferred Gate Repair Company

Homeowners across Clovis call us because we treat their gates like a problem to be diagnosed, not an excuse to sell a replacement. Cody Beckman built our service around a simple idea: show the homeowner the exact issue, explain what it costs to fix, and let them decide. That honesty shows up in the details: a written price before work starts, a live person on the phone at 2 a.m., and a technician who puts on shoe covers and lays drop cloths before walking through your entryway. Clovis families, especially those with kids and pets, appreciate that we name the brand, the part, and the price in plain language.

We’re part of the Cedarwell family of independently owned gate specialists, and we’ve been fixing gates since 2009. That means every repair and installation falls under the 365-Day Done Right Promise. If something isn’t right, we come back and make it right. No argument, no fine print. Our technicians are background-checked, uniformed, and trained on the brands Clovis homes actually have: LiftMaster, FAAC, Linear, Elite, and Mighty Mule among others. Whether you live near Clovis Community Medical Center or out toward the Sierra foothills, the standard is the same.

Wood Gate Repair in Clovis

Wood gate repair is the work most often needed on the custom gates that older Clovis neighborhoods inherited from the 1950s through the 1970s. Around Old Town and the mid-century ranch streets west of Clovis Avenue, we regularly see Douglas fir and redwood gates that have spent fifty or sixty years in direct San Joaquin Valley sun. The wood checks and cracks, the hinge screws loosen in dried-out post fibers, and the gate slowly drops until it drags across the concrete. A sagging wood gate in Clovis typically costs $160 to $310 to realign, reshim, and rehang with new hardware, and most jobs are done in under two hours.

Hinge and Post Replacement on Older Gates

When the post itself has rotted at the base or the hinge has torn free, rehanging is the right call. In Clovis’s older homes, we often find gate posts set directly in soil without gravel drainage, and the post bottoms rot from winter rains even though the visible wood looks fine. We replace the post, set it in gravel and concrete, and choose galvanized or powder-coated hinges that can handle the summer expansion cycles.

Realignment and Drag Repair

Not every sagging gate needs new parts. If the hinge screws are simply wallowed out in dry wood, we re-drill, fill with hardwood dowel, and reset the gate so it clears the ground by a consistent half-inch. That repair usually runs $145 to $220 and keeps the original gate in place, which matters to families who like the look of their Clovis home’s original carpentry.

Driveway Gate Repair in Clovis

Driveway gate repair in Clovis is usually about the operator, not the gate itself. The east-side subdivisions like Harlan Ranch, Quail Lakes, and the newer tracts along DeWolf and Shepherd are full of powered swing and slide gates that run on LiftMaster, FAAC, or Linear operators. When a Clovis driveway gate won’t open or stops halfway, the cause is most often a dead control board, a stripped drive gear, or a photocell coated in the fine dust that blows off fallow farmland every time the wind picks up. Standard driveway gate repairs in Clovis range from $180 for a sensor replacement to $400 for a control board replacement, with full diagnostic service done on-site.

Operators, Control Boards, and Lightning Damage

Summer monsoonal thunderstorms do a specific kind of damage in east Clovis: lightning strikes the open fields nearby and sends a surge through ungrounded low-voltage landscape wiring, straight into the gate operator’s control board. The gate itself isn’t hit. The board just dies. We stock common LiftMaster and FAAC boards for fast swap-out, and we add a surge suppressor at the breaker and at the board so the next storm doesn’t do the same thing.

Rack, Pinion, and Track Alignment

Slide gates in Clovis’s newer developments sit close to the ground, and the chain drive or rack and pinion picks up dust, sand, and grit from the dry valley soil. Over time that grime builds into a paste that makes the gate jerk and stall. We clean the track, re-grease with a dust-resistant lubricant, and align the rack so the gate runs smooth. The typical cost for that work in Clovis is $160 to $260.

Trusted Brands We Service in Clovis

We’re factory-trained on the brands Clovis gates are actually built with. That includes LiftMaster, the most common driveway opener in Harlan Ranch and the gated communities east of Temperance, plus FAAC and BFT for higher-end automated gates, and Elite and Mighty Mule for DIY and light-duty openers that came with the house. Because we carry common boards, gear sets, and photocells for these brands on our trucks, most Clovis repairs are completed on the first visit rather than after a parts order. That matters when your gate is stuck open and your dog wants to explore the neighborhood.

Common Gate Repair Problems We See in Clovis Homes

• Lightning-fried control boards in east Clovis. Summer storms hit the open fields around Harlan Ranch and the new subdivisions, sending surges into ungrounded landscape wiring. The gate doesn’t get struck; the board just stops working, and the fix is a board swap plus a surge suppressor.
• Heat cycle sag on metal driveway gates. Days over 100°F make iron and steel expand, then cool nights contract them. After a few hundred cycles, hinge post footings loosen and the gate leans enough to bend the operator arm or strip the gear. This is the most common repair we do in Clovis in July and August.
• Dust-clogged safety photocells on slide gates. East and northeast Clovis sit on former farmland, and the fine silt blows into chain drives and coats photocell lenses. The result is a gate that stops halfway for no reason, or refuses to close at all.
• Old wooden gates pulling out of dry, cracked posts. Around Old Town and the mid-century ranch neighborhoods, gates from the 1950s and 60s are still in service. The original hinge screws have worked loose in dessicated wood, and the gate drags or won’t latch.

Pricing for Gate Repair in Clovis, CA

We Also Serve Cities Near Clovis

Our Gate Repair crews cover the entire Clovis area, and we also take calls from homeowners in Clovis‘s neighboring communities. That includes Fresno, Sanger, Fowler, and Madera, with the same written-price promise and the same 365-Day Done Right backing on every job. If you’re just outside Clovis and plan to call, do it early in the week; slots fill fast after storm fronts move through.

FAQs About Gate Repair in Clovis