Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Kerman
When a gate stops opening on a ranch off S. Madera Avenue or a driveway gate off California Avenue refuses to slide, the fix needs to be structural first, not cosmetic. Most gate failures in Kerman start at the post or the footing, because fine orchard dust and hard caliche soil work against hinges, tracks, and operators year-round. Our crews understand what a 24-foot pipe gate weighs, how dust packs into a rack, and why a misaligned panel usually means the post has shifted, not the panel. If your gate is sagging, scraping, or stuck, call us at (559) 785-2501. A live person answers, and we’ll get a crew scheduled for Kerman right away.
Why Latch and Post Gate Repair Fresno Is Kerman’s Preferred Gate Repair Company
We’re not a general handyman service that occasionally looks at a gate. Our Gate Repair crews work on gates every day, and the rural properties around Kerman are exactly the kind of work we know best. Long driveways, wide swing panels, solar-powered controls, and gates that have to hold back livestock or keep vineyard dust from blowing into the yard. That’s the daily reality here, and it shapes how we diagnose a problem. We don’t start by adjusting hinges. We start by checking the post footing, because in Kerman’s sandy, uncompacted soil, that’s where the failure usually begins.
Every crew carries shoe covers and drop cloths as standard, because the gate might be outside but the control box is often in the garage, and we’ll walk through your home to reach it without tracking dirt inside. The price is written down before any work starts, so there’s no surprise on the invoice. And every repair and installation is covered by our 365-Day Done Right Promise. If something isn’t right after we leave, we come back and make it right. No argument, no fine print. Cody Beckman holds the team to that standard on every job we run in Kerman.
Styles & brands we work with
Wrought Iron Gate Repair in Kerman
Wrought iron gate repair in Kerman usually means one of three things, and our Kerman Electric Gate Repair team handles them all: a hinge has torn loose from a rusted section of the frame, a decorative picket has cracked at a weld, or the whole panel has sagged out of square after years of heat expansion and dust loading. The fix is rarely a single weld. It’s a sequence: grind back the rust, rebuild the weakened section, re-hang the panel level, and then re-set the post if the footing has loosened. We quote the whole sequence before we start, so you know the number up front. Most structural wrought iron repairs on Kerman gates run between $280 and $650 depending on how much of the frame needs to be rebuilt.
Hinge and Post Rebuilds on Decorative Gates
When a wrought iron gate starts dragging on the ground at the latch end, the hinge side has usually dropped. Sometimes the hinge itself is worn. More often in Kerman, the post has loosened in the soil and started to lean under the panel’s weight. We don’t just shim the hinge and call it done. We dig out the old footing, set the post deeper, re-pack it properly, and only then re-hang the panel. That’s the difference between a repair that lasts a season and one that lasts years.
Rust Repair and Repainting on Iron Gates
Rust on Kerman iron gates moves fast in summer, when the metal gets hot enough to expand and crack old paint, then cool nights pull in moisture. We grind out the rust pockets, weld in new material where the metal has thinned, and finish with a rust-blocking primer and topcoat. It’s not a paint job. It’s structural work first, then paint. Most repair-and-repaint jobs on ornamental gates run $350 to $800 depending on gate size and how much steel needs to be replaced.
Metal Gate Repair in Kerman
Metal gate repair in Kerman covers the big work we see west of town: pipe gates, tube steel driveway gates, chain-link farm gates, and the custom welded panels that run along rural lots and vineyard entrances. The most common problem on these gates is sag. Not because the panel failed, but because the hinge post has moved. Fine dust and sandy soil don’t hold a shallow footing well, and after enough seasons of heat expansion and wind load, the post starts to lean. We correct the post first, then the panel. Most metal gate repairs in Kerman run between $200 and $900, with full post replacement and re-hang on large farm gates at the higher end.
Sag Correction on Wide Farm Gates
A 20-foot pipe gate that’s sagging six inches at the latch end needs more than a turnbuckle kit. It needs the post re-set and the panel lifted back into plane. We bring the right equipment to lift a heavy panel safely, and we check the welds at every joint while it’s up. On the bigger ranch gates, it’s often cheaper to re-weld and re-set properly than to keep patching the same failure every year.
Track and Roller Rebuilds on Slide Gates
Slide gates on Kerman properties collect dust like nothing else. Orchard dust and field grit pack into the track, wear down the rollers, and then the rack and pinion starts to bind under motor strain. If you hear grinding or the motor is working harder than it used to, that’s dust in the track. We clean the full run, replace the worn rollers, and service the rack so the motor doesn’t strip its own gears. Most track and roller rebuilds run $180 to $400.
Trusted Brands We Service in Kerman
Our technicians are factory-trained on LiftMaster operators, because they’re the most common heavy-duty opener on rural Kerman properties where a 20-foot gate needs real torque. We also service Mighty Mule solar-friendly units for remote ranch entrances with no mains power nearby, and FAAC automation on custom wrought iron driveway gates. We keep the common parts for these systems on our trucks when we head out to Kerman, which means fewer second trips. And when a part isn’t on the truck, we get it ordered same day. You won’t wait weeks for a gate that won’t close.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Kerman Homes
- Sagging panels from loose post footings. In Kerman’s sandy, uncompacted soil, shallow footings loosen under heat cycles and wind load. We set new footings deeper and wider than the original, so the gate stays level for years instead of months.
- Motor strain from dust-packed tracks. Orchard dust and field grit bind the rollers and make the operator work harder than it should. That extra strain strips gears and burns out motors prematurely. We clean and service the full track run before replacing any motor.
- Rust through the weld points on pipe gates. Rural Kerman gates, especially west of town, collect moisture at the welded joints and rust from the inside out. We cut out the failed welds and re-plate the area with fresh steel, because patching over rust never holds.
- Crooked panels after a dust storm. High winds push wide gates hard, and if the post footing is already weak, the panel goes out of square. We re-level the panel and brace the post, so the next wind event doesn’t undo the work.
Pricing for Gate Repair in Kerman, CA
You’ll get a written price before any work starts. Always. For Kerman specifically, here’s what we typically see: sag correction on a standard driveway gate runs $220 to $450. Post re-setting with a new footing runs $350 to $700. Track and roller replacements on slide gates run $180 to $400. Wrought iron rust repair with repainting runs $350 to $800. A full heavy-duty operator replacement, including the safety photocells, generally lands between $800 and $1,500. What changes the number is the gate’s width, the condition of the post, and how much steel needs to be rebuilt. Call (559) 785-2501 for an exact quote after we see the gate. The estimate is free, and the price on paper is the price you pay.
We Also Serve Cities Near Kerman
Our crews work regularly in Gate Repair in Kerman and the surrounding towns. We cover rural and residential properties in Fresno, Madera, Clovis, and Fowler as well. If you’re outside Kerman proper, call and we’ll confirm which crew can reach you fastest, and we’ll give you the same written-price promise before any work begins.
Serving Kerman, CA - Our Local Coverage Area
We’re based in the Kerman area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Kerman
Kerman’s rural lots sit on sandy, uncompacted soil that doesn’t hold a shallow footing well. Add summer heat that expands the metal and wind that pushes the panel, and the post starts working loose, usually within a few years of the original install. The fix is a deeper, wider footing with properly packed base material, not a shim behind the hinge. Call (559) 785-2501 and we’ll check your post before recommending any panel work.
Yes, if it’s sized correctly. A heavy 20-foot welded pipe gate needs a high-torque operator with a battery bank and panel sized for winter sun angles, not summer peak. Mighty Mule and LiftMaster both make solar-capable units we’ve installed on remote entrances around Kerman. The key is matching amp draw to the battery reserve, and we calculate that before we quote. Call us for a written recommendation for your specific gate.
On properties near orchards or open fields, we recommend servicing the track and rollers every 12 months. The dust load here is heavy enough that a year is about as long as most roller bearings last before they start to bind. Skipping that service wears out the rack and pinion, and then the motor fails. A track service is cheaper than a new operator, every time.
Yes. UL 325 compliance applies to automated gates on residential and agricultural properties, which means the gate needs a monitored entrapment protection system, typically photocells and a reversing mechanism. We install the safety edges and photo eyes as part of every operator job, because a heavy gate without them is dangerous to kids, livestock, and anyone on foot. We’ll explain what your current setup needs when we’re out.
Weld failure at the hinge and latch points, almost always accelerated by rust. These gates are heavy, and every weld carries load. Once one joint rusts through, the panel twists and the remaining welds start to crack. We cut out the failed section, re-plate with fresh steel, and re-weld properly. If the post has moved, we fix that in the same visit. Call (559) 785-2501 and we’ll give you a straight answer on what’s failing.
If your gate is sagging, stuck, or the operator is grinding through dust, call Latch and Post Gate Repair Fresno at (559) 785-2501. We’ll give you a free estimate, a written price, and a repair that’s built for Kerman’s heat, dust, and soil. Cody Beckman and the crew will treat your property the way we’d want ours treated: clean, straight, and fixed right.
Written by Cody Beckman, Owner at Latch and Post Gate Repair Fresno, serving Kerman and the surrounding Central Valley since 2009.