Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Selma
Gate repair in Selma usually comes down to one of two problems: the gate won’t open, or it won’t stay where you put it. We fix both, and we do it with a written price before any work starts. Latch & Post Gate Repair is the Cedarwell-family gate specialist serving Selma from our Fresno office, and we answer the phone 24 hours a day at (559) 785-2501. If your wrought-iron gate sags at the latch end off Floral Avenue, or a solar opener quit during a fog spell near Nebraska Avenue, we’re the crew that knows exactly what you’re dealing with.
Why Latch and Post Gate Repair Fresno Is Selma’s Preferred Gate Repair Company
Selma homes don’t all look alike. Some of you live on ranch-style lots with 20-foot driveway gates and solar openers. Others run packing houses or agricultural yards where a gate cycles dozens of times a day in dust that would choke a lesser operator. We stock parts locally for Selma customers and our Gate Repair team runs out here regularly, so most jobs get scheduled within a few days, not weeks. Cody Beckman leads the crews, and every technician follows the same Cedarwell C.A.R.E. routine on your property: shoe covers on, drop cloths down, and a photo of the clean-up before we leave. That’s not an upsell. It’s just how we work. A live person answers when you call, and nobody at your door is anyone we haven’t background-checked and trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule.
Styles & brands we work with
Gate Welding in Selma
Gate welding in Selma is often the difference between replacing a wrought-iron gate and keeping the one you’ve had for forty years. We see cracked hinge brackets, snapped pickets, and rusted-through lower rails on gates that were custom-built when the house went up in the 1960s. Rather than patch a crack with a surface weld that fails again by harvest season, we grind back to clean metal, weld a proper fillet, and reinforce the joint so it carries load the way the original design intended.
Hinge and Post Reinforcement
When a gate sags, the hinge post has usually started leaning. On Selma’s sandy, dry soil, a post set in a shallow footing thirty years ago will eventually pull toward the gate’s weight. We dig out the post, set a new one in deeper concrete, and weld a fresh hinge plate while we’re there. Most hinge-post replacements on Selma residential gates run $350 to $600 depending on post size and gate weight.
Rust Repair and Picket Replacement
Winter tule fog leaves a fine moisture film on everything, and over decades that turns untreated steel to flake. We cut out the rusted section, weld in matching stock, and grind the seam smooth before priming and painting. A typical rust-through repair on a Selma wrought-iron gate runs $180 to $320 per section.
Commercial Gate Repair in Selma
Commercial gate repair in Selma is a different animal than residential work. The packing houses and cold storage yards along Highway 99 run high-cycle slide gates that open for every truck, every shift, sometimes a hundred times a day. Summer heat makes those steel tracks expand. Dust from the orchards and packing lines coats the rollers and the loop detector sensors. We get called when a gate reverses for no reason, or when a chain drive eats itself after a season of neglect.
High-Cycle Slide Gate Service
Slide gates on Selma packing-house entrances need a different service schedule than a driveway gate in Fowler. We replace worn chain drives, set the limit switches so the gate doesn’t slam the end stop, and recalibrate loop detectors for the thermal expansion that shifts sensor thresholds in July. A commercial slide gate service call in Selma typically runs $250 to $500 for a single visit, with heavier repair work like chain replacement in the $600 to $1,100 range depending on gate length and motor access.
Loop Detector and Safety Edge Testing
When a Selma commercial gate reverses for no reason in summer, the loop detector is usually misreading the heat-expanded track or a truck that idles over the loop. We test the detector threshold, adjust the safety edge sensitivity, and confirm the photocells are aligned for the full gate span. Safety edges and loop repair on commercial gates run $200 to $450 depending on the system.
Trusted Brands We Service in Selma
We work on the brands Selma families and farm yards actually own. That means LiftMaster on a ranch entrance, FAAC on a packing-house slide gate, and Mighty Mule on a two-acre lot east of town. We stock common boards, remotes, and safety eyes locally for Selma customers, so a LiftMaster logic board replacement doesn’t always mean waiting for a part to ship. If your Elite or DoorKing opener has a fault code we can’t clear from the phone, we’ll bring the right parts the first visit.
Common Gate Repair Problems We See in Selma Homes
- Sagging wrought-iron gates. Mid-century Selma homes often have original ornamental gates on posts that were never set deep enough. Dust and dry summers loosen the post footing, and the gate drops at the latch end until it scrapes or won’t close.
- Solar gate openers dead in winter. On the rural fringes around Selma, where grid power isn’t practical for a long driveway entrance, solar panels feed a battery that runs the opener. Weeks of tule fog starve the panel, the battery drains, and the gate sits dead until spring. We often add a second panel or a larger battery bank so the gate doesn’t strand you every January.
- Thermal expansion on slide gates. Packing-house gates and wide farm entrances on Mountain View Avenue and east of town expand in 105-degree heat. The track shifts a half-inch, the gate binds, and the opener reverses or throws a fault. Summer is our busiest season for track realignment in Selma.
- Rusted hinges and latch hardware. Winter fog moisture settles on unpainted gate hardware. Hinges seize, latch springs corrode, and the gate gets hard to open by hand or with an opener. We replace hinge pins, weld on new brackets, and use corrosion-resistant hardware where the fog is worst.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Selma, CA
Here’s an honest look at what gate repair costs in Selma. A standard service call is $95, which covers travel to Selma, diagnosis, and a written quote. Latch replacement runs $140 to $230. Hinge tightening or replacement on a sagging residential gate is $180 to $400. Welding repairs run $180 to $320 per section. Solar battery replacement on a rural gate opener is $150 to $350 depending on battery size. Commercial slide gate service runs $250 to $500 per visit, with heavier repairs like chain drive replacement at $600 to $1,100. Every price is written down and agreed to before we pick up a tool. Call (559) 785-2501 for an exact quote. The estimate is free.
We Also Serve Cities Near Selma
Our crews cover all of Selma and the surrounding communities: Fowler, Parlier, Kingsburg, and Reedley. Whether it’s a sagging ranch gate off a county road or a solar opener that quit in the fog, we’re the Gate Repair team that shows up with the right parts and a written price. If you’re just outside Selma on a long driveway or an orchard entrance, call and we’ll schedule the same visit we would for a neighbor in town.
Serving Selma, CA - Our Local Coverage Area
We’re based in the Selma area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Selma
Your solar gate opener stops working in winter because tule fog blocks the sunlight your panel needs to charge the battery. Selma’s fog can sit for two or three weeks at a time, and a single panel with a small battery simply runs out. We fix this by adding a second panel, increasing battery capacity, or switching to a low-draw control board. Call (559) 785-2501 and we’ll bring a meter out to test your panel output before you spend money on parts.
No, welding a brace in the middle of a sagging Selma gate won’t fix the problem, and it can make things worse. The sag almost always starts at the hinge post, which has leaned or settled in the dry Selma soil. A brace transfers load to the middle of the gate, which then bends or cracks there instead. The lasting fix is resetting or replacing the hinge post, then rehanging the gate square. We’ll show you the post lean with a level before we quote anything.
Yes, a safety photocell on your farm gate is required by California law and it prevents the gate from closing on a person, a child, or a horse. Selma ranch gates are wide, and the photocell has to be mounted far enough apart to cover the full opening. We install LiftMaster and FAAC photocell pairs rated for the span of your gate. If your current gate doesn’t reverse when something crosses the beam, shut it off and call us at (559) 785-2501.
Yes, we repair openers on 20-foot-wide ranch entrances around Selma regularly. These gates need an operator with enough torque for the gate weight and enough travel for the full leaf swing. Out by a ranch-style property off Floral Avenue, our crew replaced a rusted hinge post on a heavy wrought-iron swing gate and swapped a decades-old operator for a LiftMaster unit with new safety photocells far enough apart for a 20-foot span, then reset the loop detector so the gate wouldn’t keep cycling when farm trucks idled over it. That’s a standard job for us, not an exception.
Your packing-house gate keeps reversing in summer because the track or loop detector is misreading thermal expansion. Selma heat can push a steel slide gate track out of line by half an inch, and a loop detector that works fine at 80 degrees triggers falsely at 105. We realign the track, reset the detector threshold, and test the safety edge so the gate cycles properly. Commercial gate repair in Selma for this problem usually runs $250 to $500 per visit.
Call Latch and Post Gate Repair for Gate Service in Selma
If your gate is sagging, dead, or reversing at the worst time, we’re a phone call away at (559) 785-2501. A live person answers, day or night, and we’ll schedule a Selma visit with a written price before any work begins. We’ll put shoe covers on before we walk past your front gate, ask before we move anything, and send you a photo of the clean-up before we pull out of the driveway. The work is backed by our 365-Day Done Right Promise: if it’s not right, we make it right. No argument, no fine print.
Written by Cody Beckman, Owner at Latch and Post Gate Repair Fresno, serving Selma since 2009.