Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Repair Cost in Fresno?
Gate repair in Fresno typically runs between $150 and $650 for most jobs, with simple latch replacements starting around $120 and full electric gate opener swaps reaching $1,800 or more. The final number depends on whether you’re dealing with a sagging wooden gate, a stuck slide track, or a dead circuit board on an automatic opener. At Latch and Post Gate Repair Fresno, we hand you a written price before any work begins, so you’ll know the exact figure before we touch a single hinge.
We’ve been repairing gates across Fresno since 2009 as part of the Cedarwell family, and the prices below reflect what we actually see in neighborhoods from Woodward Park to Sunnyside to the Tower District. Not national averages. What homeowners here pay.
Gate Repair Cost Breakdown (2026)
Here’s how much gate repair costs in Fresno, CA in 2026, broken down by the type of work. These are real ranges based on jobs we’ve completed across the city.
| Repair Type | Typical Cost Range | What It Includes |
|---|---|---|
| Gate latch or lock replacement | $120 – $280 | New latch hardware, alignment, testing |
| Hinge replacement (standard gate) | $150 – $350 | Removal of old hinges, installation, adjustment |
| Sagging gate correction | $180 – $420 | Frame bracing, hinge realignment, post assessment |
| Rolling gate track repair | $220 – $550 | Track straightening, roller replacement, alignment |
| Electric gate opener repair | $250 – $700 | Diagnostics, actuator or motor repair, limit switch adjustment |
| Electric gate opener replacement | $800 – $1,800 | New opener unit, installation, programming, testing |
| Gate post replacement (wood or steel) | $300 – $900 | Post removal, new post set in concrete, gate re-hang |
| Full gate replacement (single swing) | $600 – $2,200 | New gate, hardware, installation, old gate haul-away |
Every gate comes down to two parts: the latch that holds it and the post that carries it. That’s the job we focus on. When the post shifts in Fresno’s clay-heavy soil during wet winters and hard, dry summers, the latch stops lining up and the whole gate starts fighting you. That’s the single most common issue we see, and it usually lands in the $180 to $420 range.
What pushes a job toward the top of any range? Three things. First, access: if we’re working on a hillside gate in Bluffs or a tight alley entrance in Old Fig Garden, the physical setup takes longer. Second, the gate material: a solid steel gate weighs hundreds of pounds and needs two technicians or a lift assist. Third, the opener itself: a Viking or DoorKing commercial-style opener costs more to repair than a basic Mighty Mule, simply because parts are pricier and the diagnostics run deeper.
What Affects Gate Repair Pricing in Fresno
Several factors move the final number. Here’s what we look at when we quote a job, and what you can expect to see reflected in your written estimate.
- Gate material and weight. A lightweight tubular aluminum gate is easier to re-hang than a solid wrought iron one. Weight affects how much labor is involved and whether we need a second technician on site.
- Opener brand and age. We’re factory-trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Parts for older FAAC or DoorKing units sometimes cost more because they’re less common locally, while LiftMaster parts are usually quicker to source.
- Post condition. Fresno’s soil expands and contracts hard. A post set shallow in clay will shift within a few seasons. If your post is cracked, rotten, or leaning, the repair price goes up because we have to set a new post before we can re-hang the gate.
- Track and roller wear on slide gates. Slide gates in Fresno collect dust and grit from dry summers. Worn rollers grind the track down over time. If the track needs straightening or section replacement, that adds $100 to $250 over a simple roller swap.
- Control board and safety sensor issues. Electric gates have photo eyes, edge sensors, and circuit boards. A failed control board on a BFT or Linear opener is a $300 to $600 repair, while a misaligned photo eye might only be a $75 service call.
- Location on the property. Gates at the end of long driveways, on uneven terrain, or in gated communities with HOA access rules can take longer to reach and work on. We don’t charge extra for distance within Fresno, but site conditions do affect labor time.
One thing that never affects your price at Latch and Post: surprises. You get a written price before we start. No vague verbal estimates, no “we’ll see when we get in there.” The number we hand you is the number you approve.
Common Gate Problems and What They Cost to Fix in Fresno
Let’s get specific about the problems we fix most often in Fresno, and what each one costs. If you’re searching for gate repair near me in Fresno, CA, chances are one of these sounds familiar.
Sagging Gate
A gate that scrapes the ground or won’t latch anymore usually needs hinge & post repair. In Fresno, the clay soil under driveways expands in winter and contracts in the heat of a 105-degree July, which slowly works posts loose. Expect to pay $180 to $420 for hinge replacement, frame bracing, and post assessment. If the post itself has moved, add the post replacement range of $300 to $900 on top.
Electric Gate Won’t Open or Close
Diagnosing an opener that won’t respond starts with power, then the control board, then the actuator or motor. A dead control board on a Linear or FAAC unit is $300 to $600 to replace. A failed actuator on a Viking slide gate opener runs $500 to $900. If the whole opener is beyond saving, a new unit installed costs $800 to $1,800 depending on brand and gate weight. For a deeper look at electric-specific issues, see our Gate Repair in Fresno page or call us at (559) 785-2501.
Latch or Lock Failure
Locks and latches wear out fast when they’re exposed to Fresno’s dust and sun. A standard latch replacement runs $120 to $280 including hardware and alignment. If you have a keypad lock or a magnetic lock tied to your opener, expect $200 to $400 because we have to integrate the new lock with the existing access system.
Gate Off Track (Slide Gates)
Slide gate rollers fail quietly until one day the gate jumps the track and won’t move. Roller replacement with re-alignment costs $220 to $550 depending on how many rollers are shot and whether the track needs straightening. We see this most often in newer subdivisions like Copper River and Tesoro Viejo where slide gates are common.
Post Leaning or Cracked
A cracked post isn’t just a gate problem, it’s a safety problem. In the Central Valley’s shifting soil, a post can lean enough to drop a heavy gate in months, not years. Post replacement with a new concrete footer runs $300 to $900. We set every post deeper than the old one and use a mix rated for our soil conditions.
Electric Gate Repair Costs in Fresno
Electric gates carry their own price structure. Here’s the breakdown for the most common electric gate repairs we handle in Fresno, from Clovis-area HOA communities to rural acreage east of the 168.
- Photo eye sensor realignment or replacement: $75 – $200
- Remote control programming or replacement: $50 – $150 per remote
- Keypad replacement: $150 – $350
- Control board replacement: $300 – $600
- Actuator or arm replacement: $400 – $900
- Full opener replacement (unit + install): $800 – $1,800
- Battery backup installation: $300 – $500
Fresno’s summer heat is hard on circuit boards. The control box sits in direct sun on most properties, and temperatures inside that box can exceed 140 degrees on a triple-digit day. That’s why we recommend board replacements with a new enclosure seal whenever possible, and why we check the cooling airflow before we button anything up.
Safety note: electric gate openers run on high-force actuators and 120V or 240V circuits. Undertrained hands on an opener can cause serious injury. If your gate is misbehaving, call a trained technician rather than opening the control box yourself. We carry the right diagnostic tools, and we know the safe sequence for testing force and travel limits.
How Much Does a New Gate Cost in Fresno?
If repair isn’t the answer and you need a new gate, here’s what to budget in Fresno as of 2026.
- Single swing gate (wood or ornamental steel): $600 – $2,200 installed
- Double swing gate (driveway width): $1,200 – $4,000 installed
- Slide gate (single panel): $1,500 – $3,800 installed
- Slide gate (double panel): $2,500 – $6,000 installed
- Pedestrian gate (side yard): $300 – $900 installed
These include hardware, installation, and haul-away of the old gate. Material choice drives most of the spread: a basic welded steel gate from a local fabricator lands near the bottom, while a custom ornamental gate with powder coating and decorative elements pushes toward the top. We’ll give you a written quote with the exact number for your property, not a brochure range.
DIY vs. Hiring a Pro: What You Should Know
Some gate fixes are genuinely doable for a handy homeowner. A loose hinge bolt, a latch that needs a new strike plate, clearing debris from a slide track. Those are $0 in parts and an hour on a Saturday.
But anything involving the gate’s weight or the opener’s force is not a weekend project. A sagging gate can weigh 300 to 600 pounds. If it comes off its hinges while you’re under it, the result is a crushed foot, broken ribs, or worse. Electric openers carry high-tension springs and high-force arms that can maim. We’ve seen what happens when a DIY opener repair goes wrong in Fresno’s heat, and it’s not worth the $200 you saved.
When you call Latch and Post, you get a technician who’s background-checked and uniformed, trained on the brands families actually own: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We work to the Cedarwell C.A.R.E. values on every visit: Clean up like it’s our own home, Ask before we move or touch anything, Respect the family’s time and quiet hours, and Explain the price before the work.
How to Save on Gate Repair in Fresno
Here are honest ways to keep your gate repair bill down, without cutting corners that cost more later.
- Catch latch problems early. If your gate is starting to stick or the latch needs a jiggle to catch, don’t wait. A $120 latch replacement today beats a $400 frame repair in six months.
- Lubricate hinges and rollers twice a year. Fresno’s dust turns old grease into paste. We use pet-safe lubricants where there’s a choice, so your yard stays safe for kids and dogs.
- Keep the track clear. Gravel, leaves, and blown dust collect in slide gate tracks. A quick sweep every couple of weeks keeps rollers from grinding down prematurely.
- Get a written estimate before committing. Every Latch and Post visit includes a written price before work starts. No pressure. If the number doesn’t work for you, you walk away with the quote and no bill.
- Ask about what’s actually necessary. We’ll tell you if a part can be repaired instead of replaced. We’d rather earn your trust on a $200 job today and be the company you call for the big one later.
Want the exact number for your gate? Call (559) 785-2501 for a free estimate. A live person answers, 24 hours a day, seven days a week. No voicemail, no callback queue.
FAQs – Gate Repair Cost
How much does gate repair cost in Fresno?
Most gate repairs in Fresno cost between $150 and $650. Latch replacements start around $120, while electric opener repairs typically run $250 to $700. You’ll get a written price before any work starts when you call (559) 785-2501.
Is it cheaper to repair or replace a gate?
Repair is usually cheaper when the damage is limited to hinges, latches, tracks, or the opener’s electrical components, typically $150 to $700. Replacement makes sense when the post is cracked through, the frame is rusted or rotten, or the gate has sagged beyond structural repair, which runs $600 to $2,200 for a single swing gate. We’ll give you both numbers and let you decide.
How much does an electric gate opener replacement cost in Fresno?
A new electric gate opener installed in Fresno costs $800 to $1,800. The spread depends on the brand (Mighty Mule sits near the bottom, DoorKing and Viking near the top) and the weight of your gate. Call (559) 785-2501 for an exact quote on your specific opener.
Can you fix my gate the same day?
Yes, in most cases. Latch, hinge, and track repairs are usually completed the same visit. Electric opener repairs may take a day if a specific part needs to be sourced locally. A live person answers 24/7 at (559) 785-2501 to tell you what today looks like.
How much does a sagging gate cost to fix?
Fixing a sagging gate in Fresno costs $180 to $420 for hinge replacement and frame bracing. If the post has shifted, adding post replacement brings the total to $480 to $1,320. The price depends on how far the gate has moved and whether the post can be saved.
Do you charge for estimates?
No. Estimates are free, and they’re always written. You’ll see the exact number before we start any work. Call (559) 785-2501 and we’ll schedule a time that works for you.
Why Fresno Homeowners Call Latch and Post
We’re not a handyman service that also does gates. We’re only in this one line of work, and we’ve been doing it since 2009 as part of the Cedarwell family of independently owned and operated gate specialists. The families we serve, from Fig Garden to Harlan Ranch to the streets off Shaw and Herndon, care about two things: a straight answer on price and a clean house when we leave.
Here’s what every visit includes, no exceptions:
- Written price before work starts. Always included. Never a surprise.
- Shoe covers and drop cloths. We lay drop cloths on the floor and put on shoe covers before we step inside. Your floors stay clean. Every time.
- A photo of the clean-up before we leave. You’ll see it with your own eyes before our truck leaves the driveway.
- Background-checked, uniformed technicians. Trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule.
- The 365-Day Done Right Promise. If the repair or installation isn’t right, we make it right. No argument, no fine print.
- A live person on every call. 24 hours a day, 7 days a week. Nights, weekends, holidays. (559) 785-2501.
We choose pet-safe lubricants where there’s a choice, and we can schedule around nap time if quiet matters. We think about things like that because our technicians live in this community too. The same dust, the same heat, the same heavy gates.
If you need a gate looked at, start with our home page to see the full scope of what we handle, or go straight to Gate Repair in Fresno for service details. When you’re ready for a number, call (559) 785-2501. You’ll get a live person and a free written estimate.
Pricing reflects the Fresno market as of 2026. Latch and Post Gate Repair Fresno offers free estimates – call (559) 785-2501.
Written by Cody Beckman, Owner at Latch and Post Gate Repair Fresno, serving Fresno since 2009.
What Our Customers Say
"Gate motor died and they replaced it carefully, cleaning every bit of debris off the driveway. Mindful not to leave the yard open with our dog out. Great crew."
- Benson Ide"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs"Installed a new gate motor and remotes. Respectful crew, protected the driveway, and cleaned up every bit of welding debris. Walked me through the new setup patiently."
- Nick Farrow