Automatic Gate Repair in Fresno, CA

Wrought iron

Wood & steel frame

Farm & ranch

Sliding driveway gates

LiftMaster operators

Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Explore

Styles & brands we work with

01Wrought iron02Wood & steel frame03Farm & ranch04Sliding driveway gates05LiftMaster operators

Before & after

See the difference

Recent ProjectFull RestorationComplete Upgrade

BeforeAfter

BeforeAfter

BeforeAfter

Automatic Gate Repair in Fresno, CA

Automatic gate repair in Fresno usually costs between $225 and $490 for common issues like sensor realignment, circuit board replacement, and limit switch adjustments. Most jobs are completed the same day we arrive. If your gate has stopped opening, only opens halfway, or reverses without warning, call Latch and Post Gate Repair Fresno at (559) 785-2501 and we’ll give you a written price before any work begins. This page covers what we fix, what it costs, and what to expect from our Gate Repair in Fresno process.

Automatic gates work hard in Fresno’s heat and valley dust. The motors, sensors, and control boards sit outside all year, and those conditions take a toll. Our technicians at Latch and Post are factory-trained on FAAC, BFT, Linear, and Viking systems, and we’ve repaired enough gates in neighborhoods like Woodward Park, Tower District, and Sunnyside to know exactly what fails and why.

Every gate comes down to two parts: the latch that holds it and the post that carries it. That’s the job we focus on.

Key Takeaways

• Automatic gate repair in Fresno typically runs $225 – $490, with exact pricing confirmed in writing before work starts.
• We service FAAC, BFT, Linear, and Viking automatic gate systems, among others.
• Same-day service is available, and a real person answers our phone 24/7 at (559) 785-2501.
• Every visit includes the Cedarwell Care Promise: written pricing, shoe covers, drop cloths, and a cleanup photo before we leave.
• All work is covered by our 365-Day Done Right Promise.

When You Need Automatic Gate Repair

Not every gate problem announces itself. Often the signs are small until they aren’t. Here’s what Fresno homeowners call us about most:

• The gate stops halfway: This usually points to a limit switch that’s drifted out of position. Heat expansion on metal gates in Fresno summers makes this more common than you’d expect. The switch tells the motor when to stop; when it’s off, the gate thinks it’s already closed.
• The gate reverses before closing: Safety sensors get dirty or fall out of alignment. Fresno’s dust and cobwebs accumulate on sensor lenses faster than most people realize, especially if the gate faces an alley or open field.
• You hear the motor hum but the gate doesn’t move: This often means the drive chain or belt has slipped, or the gearbox is binding. It’s a repair that gets worse the longer it waits, because the motor keeps straining against a stuck mechanism.
• The remote works sometimes: Intermittent signal issues in Fresno can stem from a worn receiver board or interference from nearby power lines. It’s the kind of problem that’s easy to misdiagnose, which is why we test the receiver, the remote, and the wiring separately before concluding anything.
• The keypad or exit wand stopped working: These components sit in direct sun and weather. Worn seals let in moisture, which corrodes terminals and shorts circuits. We’ve seen this in Old Fig Garden and Clovis-adjacent neighborhoods alike.
• The gate slid off track or sags visibly: This is a structural issue, not just an electrical one. The post has likely shifted in the soil, or the rollers have ground down. It needs attention before the gate falls and someone gets hurt.

If you notice any of these, call us before the gate fails entirely. A gate that won’t close leaves your backyard, pool, or driveway open to kids, pets, and anyone walking by. We answer every call with a live person, day or night.

Our Automatic Gate Repair Process

Here’s exactly how a Gate Repair services visit works when you call Latch and Post Gate Repair Fresno:

1. You call, a person answers: No voicemail, no callback queue. We listen to what the gate is doing, ask a few questions about the brand and symptoms, and schedule a time that works for you. If it’s urgent, we’ll tell you honestly whether we can make it today.
2. We diagnose before we quote: The technician arrives at your Fresno home, inspects the operator, sensors, track, hinges, and post, and explains exactly what’s wrong in plain language. You get a written price for the repair before a single tool comes out of the truck. No pressure. If it’s a small fix we can handle on the spot, you’ll know the cost upfront.
3. We protect your property: If the control box is inside the house or garage, or if the gate is near finished surfaces, we put on shoe covers and lay drop cloths before stepping inside. We ask before moving bikes, trash bins, planters, or anything else near the gate. Your floors stay clean; your stuff stays where it was.
4. We repair the gate properly: We use manufacturer-compatible parts for FAAC, BFT, Linear, Viking, and other systems, and we test the open-and-close cycle multiple times before we call it done. We adjust force settings so the gate closes firmly without slamming, and we check the safety sensors after every repair.
5. We show you the cleanup: Before we leave, we take a photo of the work area and show you it’s clean. That’s part of our Cedarwell C.A.R.E. routine: Clean up like it’s our own home, Ask before we touch anything, Respect your time and quiet hours, and Explain the price before the work.
6. We follow up if anything feels off: Every repair is covered by the 365-Day Done Right Promise. If the gate misbehaves again within the year, we come back and make it right. No argument, no fine print.

Automatic Gate Repair Pricing in Fresno

We don’t hide behind vague estimates. Here’s How Much Does Gate Repair Cost in Fresno, CA? (2026 Price Guide), based on the work we’ve done in neighborhoods across the city:

What changes the number? The age of your system matters. A 12-year-old FAAC opener with a burned-out control board costs more than a three-year-old Linear with a loose wire. Gate length and weight factor in too: a 20-foot iron driveway gate puts more strain on the motor than a 6-foot pedestrian gate. And if the post itself has shifted, the repair goes beyond the operator and into Gate Realignment and structural work, which is why we inspect the post even when the complaint is electrical.

You’ll always see the exact number in writing before we start. No hidden trip charges, no add-ons after the fact. Call (559) 785-2501 for a free estimate. If the repair is small and we can do it on the first visit, you’ll know the cost within minutes of our arrival.

Frequently Asked Questions About Automatic Gate Repair in Fresno

How much does automatic gate repair cost in Fresno?

Automatic gate repair in Fresno generally costs between $225 and $490 for typical electrical and mechanical repairs, with smaller fixes like sensor cleaning starting around $95 and bigger jobs like control board replacement reaching up to $550. The exact price depends on your gate brand, size, and what failed. Call (559) 785-2501 for a free, written estimate before any work begins.

Can you fix my automatic gate the same day?

In most cases, yes. We schedule same-day service for gate failures whenever our Fresno schedule allows, and we’ll tell you honestly when you call whether we can make it today. A live person answers 24/7, so if your gate is stuck open at 9 p.m. and you have a dog that needs to stay in the yard, call us. We’ll talk through what’s happening and get a technician out as soon as we can.

Is it cheaper to repair or replace an automatic gate opener?

It depends on the age of the opener and what failed. If the operator is under 8 to 10 years old and the problem is a bad sensor, limit switch, or receiver, repairing it almost always costs less. Replacement usually makes more sense when the motor is burned out or the control board has failed on an older unit, especially if parts are discontinued, so check How Much Does Gate Repair Cost? (2026 Price Guide) - Fresno, CA to compare. We’ll show you both numbers and let you decide. We don’t push replacements when a repair will hold.

What brands of automatic gate openers do you service?

Our technicians are factory-trained on FAAC, BFT, Linear, and Viking systems, along with LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule. If you’re not sure what brand you have, we’ll identify it during the inspection. The right fix on the first visit matters more than guessing.

Will the repair leave a mess in my yard or garage?

No. The Cedarwell Care Promise covers every visit: shoe covers and drop cloths inside the home, respect for your yard and driveway, and a cleanup photo shown to you before we leave. If the control box is in the garage, we protect the floor around it. We ask before moving anything. You should not be able to tell we were there, except that the gate works.

Call Latch and Post Gate Repair Fresno for Automatic Gate Repair

If your automatic gate is acting up in Fresno, call us at (559) 785-2501. We’ll answer the phone, give you a straight answer about your situation, and schedule a visit at a time that works for your family. Every repair starts with a written price, and every job is backed by our 365-Day Done Right Promise. If it’s not right, we make it right.

You can also learn more about our broader Gate Repair in Fresno services, or head back to our home page to see everything we do.

Written by Cody Beckman, Owner at Latch and Post Gate Repair Fresno, serving Fresno.