Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Parlier
When an electric gate stops working on a Parlier property, it’s rarely a small inconvenience. It’s a half-ton steel barrier stuck across a driveway, a farm entrance that won’t open for a work truck, or a solar operator that went dead before the morning crew arrived. Electric gate repair in Parlier most often comes down to one of three failures: a burned-out operator motor, a gate leaf that’s sagging off its hinges, or a power feed that can’t reach a remote corner of the lot. Call (559) 785-2501 and a live person answers, any hour, any day.
We work on Parlier gates every week. We know the difference between a chain-link gate on a residential lot near Tuolumne Street and a 16-foot pipe swing gate off Academy Avenue that a tractor rattles through twice a day. That local familiarity changes how fast we diagnose and how well the fix holds.
Why Latch and Post Gate Repair Fresno Is Parlier’s Preferred Electric Gate Repair Company
Parlier homeowners call us because we talk about gates the way a neighbor would: what broke, what it costs, and whether it’s worth fixing. There’s no alarm in our voice and no pressure at the door. Every visit starts with a written price before any work begins. You’ll see the number on paper, you’ll agree to it, and then we start. Nothing gets added at the end.
Cody Beckman leads our team, and the standard he set in 2009 still holds: every technician is background-checked, uniformed, and trained on the exact brands Parlier residents actually own. LiftMaster, FAAC, Elite, Mighty Mule. Those operators show up on rural lot entrances and manufactured home driveways all over town, and our techs carry the boards, arms, and limit switches to fix them right the first visit.
We also bring the Cedarwell Care Promise to every Parlier job. Shoe covers and drop cloths before anyone steps inside your home. A photo of the clean-up before we leave. And the 365-Day Done Right Promise behind the whole thing: if the repair isn’t right, we come back and make it right. No argument, no fine print.
Styles & brands we work with
Electric Gate Motor in Parlier
Electric Gate Motor replacement in Parlier typically runs $650 to $1,400 for a standard residential or light-farm swing gate operator, and we write that exact figure down before touching a thing. A motor that hums but won’t move usually means a capacitor or gearbox failure; a motor that’s completely dead often points to a control board, a power supply problem, or corrosion inside the housing.
Solar Operator Motor Work
Many Parlier acreage gates run on solar because running conduit to the back fence line costs more than the gate itself. When the motor burns out, we check the panel output, the battery condition, and the charge controller before we quote a replacement. Otherwise you get a new motor wired to a dead battery and the same failure returns within weeks.
Heavy-Duty Motors for Farm Entrances
Wide double-swing pipe gates need a stronger motor than a garden gate, and that changes the math. FAAC and LiftMaster make heavier units built for exactly this load, and we stock or source them fast for Parlier customers. A 16-foot cantilever or double-swing farm gate is not a job for a residential arm opener, and we’ll tell you that plainly.
Gate Access Control in Parlier
Gate Access Control in Parlier covers everything that tells the gate to open: keypads, remote controls, loop detectors, safety sensors, and the control board itself. On Parlier farm properties, access control usually means a keypad for the family and a loop detector for equipment. Repairs in this category run $180 to $600 depending on the part, and every price is quoted in writing before work starts.
Keypads and Remote Controls
A dead keypad is often a worn membrane switch or a corroded terminal strip rather than a failed unit. We test the circuit before ordering anything. Remote controls that stop working after a wind storm usually need a simple reprogram, not replacement, and we’ll show you what we’re doing.
Loop Detectors and Safety Sensors
Farm loop detectors on Parlier gates pick up false readings from tall weeds and the metal edges of equipment, which makes the gate stop mid-cycle or reverse unexpectedly. We adjust sensitivity, clear the detection field, and when needed move the loop. Safety sensors, the photoelectric eyes, fail when dust cakes the lens; cleaning and realignment fixes most issues, which is a lot cheaper than a new sensor set.
Trusted Brands We Service in Parlier
We’re factory-trained on the gear Parlier families and growers actually run: LiftMaster, FAAC, Elite, and Mighty Mule. That matters because these brands use different control board logic, different limit-setting procedures, and different torque profiles. A technician who knows one brand and guesses at another kills your gate twice: once with the wrong repair and again with a callback. We stock common boards, remotes, arms, and hinges for these brands and keep parts moving into Parlier weekly. When the part is on hand, the repair often finishes same-day.
Common Electric Gate Repair Problems We See in Parlier Homes
- Solar panels coated with dust. A few weeks of Parlier’s fine silt cutting across an open field drops panel efficiency enough that the battery never fully charges. The gate works fine at dusk and dies by dawn, right when the farm crew arrives.
- Hinge post lean on double-swing pipe gates. Repeated tractor traffic and dry, compacted soil push the post out of plumb. The leaves drag, bind, and eventually the operator strains itself trying to move a gate that no longer swings level.
- Loop detectors reading weeds and equipment edges. Tall grass, a disc harrow edge, even a metal gate brace can confuse the detector. The gate stops mid-cycle or reverses, which is dangerous if someone’s walking through with tools.
- Limit settings lost after wind. Strong summer winds push the gate leaves against the stops, and the operator forgets its open and close positions. The gate starts slamming or stops a foot short of closed.
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in Parlier, CA
Here are the numbers we quote on Parlier service calls. A keypad replacement runs $180 to $350. Loop detector repair runs $200 to $450. Safety sensor replacement runs $150 to $300 for a set. Electric gate motor replacement runs $650 to $1,400. Control board replacement runs $300 to $700. A full access control system for a farm entrance, including keypad, loop detector, and heavy-duty operator, commonly lands between $2,200 and $4,800.
What moves a quote up or down is gate width, gate weight, and whether power is grid-connected or solar. We don’t charge for the estimate, ever. You’ll see the exact number on paper before anyone picks up a tool.
We Also Serve Cities Near Parlier
Our crews cover Parlier and the surrounding Central Valley communities. We do Electric Gate Repair work in Selma, Reedley, Kingsburg, and Fowler. If you’re a few miles outside Parlier toward one of those towns, the same team and the same written-price promise apply to your gate. Learn more about our work across the area on our Electric Gate Repair in Parlier page.
Serving Parlier, CA - Our Local Coverage Area
We’re based in the Parlier area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Parlier
The most common cause is dust accumulation on the solar panel. Parlier’s fine agricultural dust settles on the glass, cuts charging efficiency, and leaves the battery undercharged overnight. By 5 a.m., the battery voltage drops below the operator’s threshold and the gate won’t budge. We clean the panel, test the battery’s actual capacity, and check the charge controller before replacing anything. Call (559) 785-2501 and we’ll diagnose it over the phone first.
Hinge replacement and hinge post reinforcement. The repeated torque of a heavy gate with a tractor brushing against it works the post loose in the soil. We remove the old hinge, set a new reinforced post with deeper concrete, and rehang the leaf so it swings level. The motor usually survives once the gate moves freely again.
Yes. Solar operators with a properly sized panel and battery bank are standard on rural Parlier entrances where utility power would mean hundreds of feet of conduit. We size the panel to your gate width and daily cycle count, and we use charge controllers that handle long dry summers. The system works year-round without a power bill.
Usually the frame sags before the rollers fail. On older Parlier homes, chain-link gates are hung on non-standard posts that settle over time. The gate frame bends slightly, the rollers bind against the track, and the gate gets stiff. We check frame alignment first, then decide whether bearing rollers need replacement or the gate needs rehanging. Most residential roller jobs run $150 to $350.
We reset the limits and then check what let them drift. On Parlier ranch gates, the usual cause is wind pushing the leaf past its normal stop, which confuses the operator’s position sensor. We reset open and closed limits, tighten the stop hardware, and where needed add physical stops so the gate can’t overtravel again. The fix usually takes one visit.
Call for a Free Estimate on Electric Gate Repair in Parlier
If your gate is stuck, grinding, or dead, call (559) 785-2501. A live person answers, day or night. We’ll talk through what’s happening, give you an honest range over the phone, and schedule a visit with a written price before any work starts. Parlier farm gates, chain-link gates, and solar operators are what we do every day. You’ll see the number in writing, the floors will stay clean, and the gate will be right.
Written by Cody Beckman, Owner at Latch and Post Gate Repair Fresno, serving Parlier and the surrounding Central Valley since 2009.