Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Installation Cost in Fresno?
Gate installation in Fresno typically costs between $1,800 and $7,500 for a standard driveway gate project in 2026, with most homeowners paying around $3,200 to $4,800 for a complete installation including the gate, posts, hardware, and labor. A simple single-swing Pedestrian Gate runs $600 to $1,800, while a custom electric driveway gate with automation lands between $4,500 and $12,000 depending on size, material, and opener brand. These are real numbers from the Fresno market, not national averages, and reflect what we see on bids across neighborhoods like Woodward Park, Tower District, Sunnyside, and Fig Garden.
Key Takeaways
- Most Fresno gate installations cost $1,800 to $7,500 all-in, with electric driveway gates at the higher end.
- Material choice drives the biggest price swing: steel runs $1,200 to $4,000 for the gate alone, ornamental iron $1,800 to $5,500, wood $800 to $2,800.
- Automation adds $900 to $2,500 for the opener, wiring, and installation.
- Fresno’s clay-heavy soil and summer heat mean post depth and concrete curing matter more here than in coastal markets, which affects labor time and cost.
- Latch & Post Gate Repair Fresno gives you a written price before any work starts. No guessing, no surprise line items.
We’re a Cedarwell-family gate specialist focused on one thing: gates. Every quote we give in Fresno includes a written, line-itemed price before we touch anything, and our 365-Day Done Right Promise means if it isn’t right, we make it right. Call (559) 785-2501 for a free estimate, or home to see the full scope of what we handle.
Gate Installation Cost Breakdown (2026)
Here’s what we actually see on Fresno bids in 2026. These figures come from the jobs we quote and complete here, not from a national database. The ranges account for differences in gate size, material grade, and whether the existing post footings can be reused.
| Line Item | Price Range (Fresno, 2026) | Notes |
|---|---|---|
| Single pedestrian gate (wood) | $600 – $1,400 | Pressure-treated cedar or redwood, 36 – 42 inches wide |
| Single pedestrian gate (steel/aluminum) | $900 – $1,800 | Powder-coated, rust-resistant |
| Driveway gate, single swing (steel) | $2,200 – $4,500 | 10 – 14 feet wide, includes two heavy-duty posts |
| Driveway gate, single swing (ornamental iron) | $3,000 – $5,800 | Custom scrollwork raises the price |
| Driveway gate, double swing (steel) | $3,800 – $7,500 | Two panels, center latch, heavier hardware |
| Driveway gate, sliding (steel) | $3,500 – $6,800 | Good for sloped or short driveways in older Fresno lots |
| Gate automation kit (opener only) | $900 – $2,500 | Brand-dependent: Mighty Mule on the low end, LiftMaster and BFT higher |
| Post installation (per post) | $350 – $800 | Deeper footings in clay soil; includes concrete and labor |
| Site prep and debris haul-away | $150 – $400 | Leveling, old gate removal, concrete disposal |
Those numbers cover typical residential work in Fresno. The single biggest variable is material. A basic steel tube gate from a big-box supplier costs less up front, but Fresno’s sun and heat mean powder-coated steel or galvanized hardware outlasts bare metal by years. Ornamental iron holds up beautifully here, but the custom fabrication time pushes labor higher. Wood gates are the most affordable option and they do fine in Fresno’s dry heat, though they need re-sealing every two to three years to avoid cracking from the temperature swings between summer days and cool nights.
Automation is the second big swing. If you want a keypad entry, intercom, or smartphone control, expect the opener and control board to add $1,200 to $2,500 on top of the gate itself. We train our technicians on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so the right fix or installation happens on the first visit. That matters because a mismatched opener on a heavy gate wears out racks and hinges fast.
One more Fresno-specific factor: our soil. Much of the city sits on expansive clay that shifts with moisture. A 4-foot post hole in sandy coastal soil is different from a 4-foot hole in Sunnyside or McLane, where the clay grips the post but also moves it over time. We pour deeper, wider footings than code minimums in most of Fresno because we know what happens three summers later if you don’t. That adds a little to labor but saves you a leaning gate in year four.
What Affects Gate Installation Pricing in Fresno
Every quote we write is specific to your property, but these six factors determine most of the final number in this market.
- Gate material and gauge. A 14-gauge steel gate costs less than an 11-gauge. For a driveway gate that swings in Fresno’s afternoon winds, we recommend at least 12-gauge steel or commercial-grade ornamental iron. Thinner metal flexes in wind and sags at the hinges faster than you’d expect.
- Gate width and weight. A 10-foot single swing is a different job than a 16-foot double swing. Wider gates need heavier posts, larger hinge bearings, and sometimes a support wheel. Older Fresno neighborhoods like Tower District often have narrow driveways that fit a 10-foot single, while newer builds in Woodward Park or Clovis-adjacent tracts may have wider openings that demand a double.
- Soil conditions at the post locations. Fresno’s clay soil holds posts well when the footing is deep enough, but if you’re near the San Joaquin River or in an area with sandy fill, we may need deeper footings or a wider concrete collar. That’s an extra $100 to $250 per post in labor and concrete.
- Automation and access control. A simple keypad adds $400 to $800. Intercom with video, smartphone app, and vehicle sensors can push automation past $2,500. We’re factory-trained on the brands families actually own here: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule.
- Permit requirements. Fresno requires a permit for driveway gates in many cases, especially when the gate is on a corner lot or approaches a public sidewalk. Permit fees run $100 to $400 depending on scope, and the inspection process can add a day or two to the timeline. We handle the paperwork as part of the job.
- Access to the site. If the gate location is at the back of a narrow side yard with no vehicle access, our crew carries materials by hand. That adds labor time. If we can back a truck right up to the posts, the job moves faster and costs less.
Every one of these factors shows up on your written estimate as a separate line item, so you can see exactly where your money goes before you approve anything. No surprises, no vague “labor and materials” lump sum. That’s the Cedarwell C.A.R.E. way: Explain the price before the work.
If you’re still figuring out what you need, our guide to Gate Installation in Fresno walks through the whole process from measurement to final inspection.
How to Save on Gate Installation
You want a gate that holds up and a price that makes sense. Here’s what we tell our neighbors in Fresno to keep the number reasonable without cutting corners on the things that matter.
Get the post footings right the first time. The single most expensive mistake in Fresno gate work is a post that leans after a wet winter. Deeper footings cost a little more on install day and save you a full reset later. We pour every footing to match the soil at your specific property, not a one-size-fits-all code minimum.
Standard sizes beat custom fabrication. If your opening fits a standard 10-foot or 12-foot gate panel, you avoid the custom fabrication markup that comes with 11-foot-something openings. We can adjust post placement slightly to hit a standard panel size, but only when it works for your driveway layout.
Phase the automation. If the budget is tight, install the gate and posts now, then add the opener and keypad in a few months. We wire for automation during the initial install so the retrofit is straightforward. This doesn’t save you money overall, but it spreads the cost across two projects.
Choose materials rated for Fresno’s climate. Powder-coated steel and galvanized hardware cost more than bare metal, but in this sun and heat, they last two to three times longer. Replacing a rusted gate after four years is more expensive than paying for a proper finish up front.
Don’t skip the concrete cure time. We know you want the gate swinging the same day, but posts set in concrete need 24 to 48 hours to cure before hanging weight. Rushing this step leads to a gate that sags within months. We plan the timeline around this, not through it.
The easiest way to see real savings is to know the exact number before you commit. That’s why every Latch & Post Gate Repair Fresno visit includes a written price before any work starts. Call (559) 785-2501 and we’ll come out, measure, dig a test hole if needed, and hand you a line-itemed quote. The estimate is free, and there’s no pressure to say yes.
Cody Beckman, who leads our Fresno operation, puts it this way: a gate quote should read like a receipt you already approved. You should recognize every line. That’s the standard.
Step-by-Step: How We Install a Gate in Fresno
When you hire Latch & Post Gate Repair Fresno for Gate Installation services, here’s the sequence, start to finish. This is the same process we follow on every job, whether it’s a wooden pedestrian gate in Tower District or an electric double-swing in Woodward Park.
1. Site visit and measurement
We come out, measure the opening, check the soil at the post locations, and look at slope, drainage, and access. We ask about your priorities: security, kid safety, pet containment, curb appeal. The measurement takes about 30 minutes, and we test-dig at least one post hole to see what we’re working with in your specific Fresno soil type.
2. Written quote
Before any work starts, you get a written price with line items for the gate, posts, hardware, automation (if included), concrete, and labor. No verbal estimates, no “we’ll figure it out later.” You approve the quote in writing before we schedule.
3. Permitting (if required)
For driveway gates that approach a sidewalk or public right-of-way, we pull the Fresno permit and schedule the inspection. Most residential pedestrian gates in backyards don’t require one, but we’ll tell you either way.
4. Post installation
We dig the footings to a depth that fits your soil, set the posts in concrete, and brace them square. This is where Fresno’s clay soil matters: we let the concrete cure 24 to 48 hours before hanging weight on the posts. It’s the difference between a gate that stays square for 15 years and one that leans in 15 months.
5. Gate fabrication and hang
We order or fabricate the gate panel to your measurements, then hang it on heavy-duty hinges rated for the gate’s weight. For electric gates, we install the opener, run the low-voltage wiring, and set the travel limits. We’re trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so the programming is right on the first attempt.
6. Cleanup and walkthrough
We lay drop cloths on any interior floor we cross and put on shoe covers before we step inside. Before we leave, we take a photo of the cleanup and show it to you. Then we walk the gate with you: open it, close it, test the auto-reverse if it’s electric, and hand you the warranty paperwork. The Cedarwell C.A.R.E. values are the routine: Clean up like it’s our own home. Ask before we move or touch anything. Respect your time and quiet hours. Explain the price before the work.
If you’re still weighing options, our Gate Installation in Fresno page has more detail on materials and design choices.
FAQs – Gate Installation Cost
How much does a basic gate cost in Fresno?
A basic single wooden pedestrian gate in Fresno runs $600 to $1,400 installed, including posts and hardware. A basic steel Driveway Gate starts at $2,200 and can reach $4,500 for a single swing. Call (559) 785-2501 for an exact written quote based on your opening.
Is it cheaper to repair or replace a gate?
If your gate is leaning because the posts are set too shallow, repair typically costs $400 to $1,200 for post reset and re-hang, which is cheaper than a full replacement. If the gate itself is rusted through, cracked, or sagging from frame fatigue, replacement at $1,800 to $7,500 often makes more sense than repeated patch jobs. We’ll give you both numbers in writing and let you decide.
How much does it cost to add an electric opener to an existing gate?
Adding automation to an existing gate in Fresno costs $900 to $2,500 depending on the opener brand and whether we need to run new low-voltage wiring. A basic Mighty Mule opener starts around $900 installed; a LiftMaster or BFT system with keypad and battery backup runs $1,800 to $2,500. We train on all the major brands, so the programming is right on the first visit.
Do I need a permit for a gate in Fresno?
Most backyard pedestrian gates don’t need a permit in Fresno. Driveway gates that swing toward a public sidewalk or are on a corner lot often do. Permit fees run $100 to $400. We handle the paperwork and inspection scheduling as part of the installation.
How long does gate installation take in Fresno?
Most Fresno gate installations take 2 to 4 days from start to finish: day one for post holes and concrete, a 24 to 48 hour cure window, then gate hang and automation setup. Custom ornamental iron gates may add a week for fabrication. We’ll give you a timeline with your written quote.
How much does a gate cost per foot?
In Fresno, expect to pay $180 to $320 per linear foot for an installed steel driveway gate, depending on gauge and finish. Ornamental iron runs $250 to $450 per foot. Pedestrian gates are typically priced per unit rather than per foot because of the fixed cost of posts and hardware.
Why do some Fresno gates lean after a few years?
Fresno’s expansive clay soil moves with moisture, and shallow post footings shift with it. We see leaning gates regularly in Sunnyside, McLane, and other neighborhoods with heavy clay. Properly sized footings, poured 36 to 48 inches deep with a concrete collar, prevent this. If your gate is already leaning, we can reset the posts and re-hang the gate for $400 to $1,200 depending on the damage.
Why Fresno Homeowners Choose Latch & Post Gate Repair
Every gate comes down to two parts: the latch that holds it and the post that carries it. That’s the job we focus on. We’re not a general handyman service that does gates on the side. Gate repair, gate installation, and electric gate repair are what we do, every day, since 2009 as part of the Cedarwell family of independently owned and operated gate specialists.
Here’s what that means on a typical Fresno job: a background-checked, uniformed technician arrives at the time we set. We lay drop cloths on the floor and put on shoe covers before we step inside, because your floors stay clean whether we’re accessing the control panel in the garage or walking through the house to the backyard. We choose pet-safe lubricants where there’s a choice, and we can schedule around nap time if quiet matters. Your kids stay asleep, your dog stays calm, and the job gets done.
Before we touch anything, you get a written price. After we finish, we take a photo of the cleanup and show it to you. And every job, repair or installation, is covered by the 365-Day Done Right Promise: if it isn’t right, we make it right. No argument, no fine print.
If you call us at (559) 785-2501, a live person answers. Nights, weekends, holidays included. No voicemail, no callback queue. Tell us what’s going on with your gate, and we’ll set up a free estimate with a written price.
Pricing reflects the Fresno market as of 2026. Latch and Post Gate Repair Fresno offers free estimates – call (559) 785-2501.
Written by Cody Beckman, Owner at Latch and Post Gate Repair Fresno, serving Fresno since 2009.
What Our Customers Say
"Gate motor died and they replaced it carefully, cleaning every bit of debris off the driveway. Mindful not to leave the yard open with our dog out. Great crew."
- Benson Ide"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs"Installed a new gate motor and remotes. Respectful crew, protected the driveway, and cleaned up every bit of welding debris. Walked me through the new setup patiently."
- Nick Farrow