Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Installation Across Kerman
A new driveway gate in Kerman, CA typically runs between $1,800 and $6,500 installed, with electric operators adding $1,400 to $3,200 depending on the gate’s width and weight. Most single-family ranch-style homes on Kearney Blvd or along S. Madera Ave fall in the $2,400 to $4,800 range for a complete swing gate with automation. Cost depends on gate span, operator type, solar vs. wired power, and the condition of the existing posts. Call (559) 785-2501 for a written price before you commit to anything.
We work on Gate Installation projects all over Kerman, from the newer subdivisions near Kerman High School to the farmsteads west of town where driveways run a quarter mile before they reach the house. Our crews know the difference between installing a gate on a manicured front yard and setting posts in hardpan that hasn’t seen moisture since April. That matters when your gate has to open and close twice a day, every day, through dust storms and 105-degree afternoons.
Why Latch and Post Gate Repair Fresno Is Kerman’s Preferred Gate Installation Company
Kerman homeowners call us because we answer the phone. Not a voicemail, not a callback queue. A live person picks up at (559) 785-2501 at 2 a.m. if a gate has come off its track and you can’t get your truck out. That kind of availability is rare, and it’s standard for us.
Our technicians are background-checked, uniformed, and factory-trained on the gate equipment families around Kerman actually use: FAAC, Linear, and Viking operators appear on a lot of rural properties here, along with BFT on newer installs. We stock common parts for these brands locally, which means fewer “waiting on a part from the warehouse” conversations.
We also bring the Cedarwell C.A.R.E. routine to every Kerman job: a written price before any work starts, shoe covers and drop cloths when we step inside, and a photo of the clean-up before we leave. It’s not an upsell. It’s the way we work.
Founded in 2009 as part of the Cedarwell family of independently owned and operated gate specialists, Latch and Post Gate Repair works to one promise: if the installation isn’t right, we make it right. The 365-Day Done Right Promise covers every gate we install in Kerman, no argument, no fine print. Led by Cody Beckman, our team has built its reputation one gate at a time.
Written by Cody Beckman, Owner at Latch and Post Gate Repair Fresno, serving Kerman, CA.
Styles & brands we work with
Gate Installation Services in Kerman
Gate Installation Services in Kerman start with a site visit to measure the opening, check the ground for level, and look at what kind of power is available at the entrance. On a rural Kerman property, that power question drives a lot of the design. If there’s no line voltage at the gate, a solar operator with battery backup is the practical choice. We quote the full system up front so you’re not surprised by extras later.
Driveway and Ranch Gates
Most Kerman driveway gates are swing or slide designs on welded steel frames. A properly set post is the difference between a gate that swings true for a decade and one that sags within two summers. We use concrete footings sized for the gate’s weight and the soil conditions on your specific lot.
Pedestrian Gates
For homes near downtown Kerman, a standalone pedestrian gate keeps foot traffic separate from the driveway. These are often lighter tube-steel or ornamental gates with a simple latch and closer. We match the style to your existing fencing so it doesn’t look added on.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Electric Gate Installation in Kerman
Electric Gate Installation in Kerman usually means replacing an operator that the dust and heat have worn out, or adding automation to a gate that’s been manually operated for years. The operator is the motor, the brains, and the thing that takes the most abuse on a rural property. We specify them by gate weight and cycle count, not by brand loyalty.
Solar Operators for Off-Grid Entrances
Many Kerman acreages have no utility power at the road. A solar gate opener with a battery bank runs around $1,600 to $3,000 installed and handles 10 to 20 open-and-close cycles per day in Central Valley sun. We angle the panels for summer performance, when the gate gets used the most.
UL 325 Entrapment Protection
Every automatic gate we install in Kerman includes UL 325-compliant entrapment protection: either monitored photocells, contact edges, or both, depending on the gate type. This is not optional. It’s the standard that keeps kids, pets, and livestock safe.
Trusted Brands We Service in Kerman
We’re factory-trained on the brands families actually own around here, including FAAC, BFT, Linear, and Viking. FAAC and Viking operators show up on a lot of Kerman farm gates because they handle high cycle counts well. Linear is common on mid-size residential driveway gates. BFT tends to be on newer installs where the homeowner wanted a specific feature set. We stock replacement parts for all of them locally, so a repair doesn’t turn into a two-week wait. Our technicians train on these brands regularly and know their quirks.
Common Gate Installation Problems We See in Kerman Homes
- Dust-clogged slide tracks. The persistent dust out here gets into every roller and track. A 24-foot slide gate on a gravel driveway gathers enough grit in a month to strain the motor and burn out the capacitor.
- Heat-expanded metal throwing swing gates out of alignment. Central Valley summers push steel to expand, and a gate that was perfectly hung in March can bind against the post by July. We set clearance for summer, not for installation day.
- Sagging pipe gates from livestock pressure. Cows lean. They lean hard. A pipe gate that carries livestock pressure against the hinges eventually sags and breaks welds at the hinge posts. We correct the sag with reinforced posts and, where needed, a wheel support.
- Failed post footings on long driveways. On rural Kerman properties, gates stretch 16 to 24 feet and weigh several hundred pounds. An undersized footing shifts under that load. We dig and pour new footings sized for the gate’s span and the soil’s bearing capacity.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Installation in Kerman, CA
A manual driveway gate in Kerman runs $1,800 to $4,200 installed. An automatic gate installation starts around $3,500 and goes up to $8,500 or more for a long-span sliding gate with solar power and entrapment protection. Pedestrian gates run $900 to $2,200. The big cost drivers are gate width, operator weight class, solar vs. wired power, and whether the existing posts can be reused.
You’ll see the exact number in writing before we order materials or dig a hole. Written price first, every time. Call (559) 785-2501 for a free estimate on your Kerman property.
We Also Serve Cities Near Kerman
Our gate installation crews cover Kerman plus the surrounding Central Valley communities: Fresno, Madera, Clovis, and Fowler. If you’re on a rural road anywhere in this part of Fresno County, give us a call and we’ll let you know our next available date. Each of these communities is served by our local team working to the same Cedarwell Care Promise.
Serving Kerman, CA - Our Local Coverage Area
We’re based in the Kerman area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Kerman
We install a solar gate operator with a battery bank sized for your gate’s weight and daily usage. A typical Kerman acreage gate with 10 to 15 cycles per day needs a solar panel array and two deep-cycle batteries, which we build into the operator package. Total cost for solar automation runs $3,500 to $8,500 depending on gate span. Call (559) 785-2501 and we’ll measure your entrance and quote the full system.
Yes. A heavy pipe gate, especially one that’s been patched and re-welded over the years, can weigh 500 to 900 pounds. That requires a heavy-duty operator rated for that weight class, often a sliding gate motor rather than a swing arm. We spec the operator by actual gate weight, not by the gate’s width alone. Call (559) 785-2501 for a written quote.
Every automatic gate we install in Kerman includes UL 325-compliant entrapment protection, which means monitored photocells across the gate opening and contact edges where the gate meets the post. On rural properties where animals or kids are nearby, we often add a second set of photocells at the far end of the gate’s travel. The safety equipment is included in your written quote, never an add-on at the end.
Yes, in most cases. We’ll inspect the hinge posts and the existing welds first. If the post footings are solid and the welds are holding, we can mount a new operator on the existing gate. If the welds are compromised, we’ll tell you before we touch anything and include reinforcement in the written price. Call (559) 785-2501 to schedule that inspection.
A keypad mounts on a post at the driveway entrance and sends a signal to the gate operator to open. A loop detector is a wire buried in the driveway that senses a vehicle’s metal mass and triggers the gate to open automatically when a car approaches from inside. Both work well on rural Kerman driveways, and we can install them together so the gate opens for you without rolling down your window. Call (559) 785-2501 for a written quote.
Contact Latch and Post Gate Repair Fresno for Gate Installation in Kerman
If you need a new gate, an operator for an existing one, or just want to know what it would cost before you decide, call (559) 785-2501. We’ll give you a free estimate with a written price before any work starts. Live person answers, 24 hours a day, seven days a week. We serve Kerman and the surrounding Central Valley with the Cedarwell Care Promise on every job.
Written by Cody Beckman, Owner at Latch and Post Gate Repair Fresno, serving Kerman, CA since 2009.