Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Hanford
Gate repair in Hanford usually means one of three things: a sagging ornamental iron gate that drags on the concrete, an automatic opener that quit after a dust storm, or a latch that no longer catches. Our crews handle all three, and most repairs in Hanford are done in a single visit with a written price before any work starts. We answer calls around the clock at (559) 785-2501. If your gate is stuck open, stuck shut, or grinding against the driveway, that’s the number to call. We know the streets, the clay soil, and the older gate hardware that shows up on both sides of Hanford.
Why Latch and Post Gate Repair Fresno Is Hanford’s Preferred Gate Repair Company
We’re part of the Cedarwell family of independently owned and operated gate specialists, and the only thing we work on is gates. That focus shows up in the details: a written price handed to you before any work begins, shoe covers and drop cloths on every visit, and a photo of the cleanup left with you before our technician drives away. No other gate company serving Hanford matches that routine.
Our Hanford customers tend to mention two things when they call back or leave a review. First, the price on the written quote is the price they paid. Second, the technician didn’t leave a mess in the driveway or on the entry path. For families with kids and dogs, that second point matters as much as the repair itself. Cody Beckman leads our operation, and his standard is simple: treat every Hanford property like it’s our own.
Our Gate Repair team is factory-trained on the brands actually installed across Kings County. We stock common LiftMaster and FAAC parts locally, which means fewer return trips and faster turnaround when a board or sensor fails. Dispatch is coordinated from our Fresno, Central Valley office, but the crews who show up in Hanford know the local housing stock and the particular ways gates fail here.
Styles & brands we work with
Gate Welding in Hanford
Gate welding in Hanford repairs the structural failures that bolt-on fixes can’t. Wrought iron and steel gates crack at stress points: the lower hinge corner, the joint where a scroll meets the frame, the base of a post that’s been levered by shifting clay for forty years. A proper weld restores the gate’s strength instead of hiding the symptom.
Common Weld Points on Custom Ornamental Gates
We regularly weld square-tube frames, pickets, hinges, and box-post corners on custom gates around Hanford’s older east side and the ranchettes off Grangeville Boulevard. Most gate welding in Hanford runs $220 to $480 per repair point, depending on access and how much grinding and prep the steel needs. You’ll see that number in writing before we strike an arc.
Rust Repair and Ornamental Matching
Do not assume a rusted scroll means replacing the whole gate. We cut out the damaged section, weld in a matched replacement, and blend the repair so it reads as part of the original design. For historic Victorian and Craftsman homes near downtown Hanford, that visual match is the difference between a repair and an eyesore. Rust repairs and scroll replacement typically run $180 to $400 per section.
Commercial Gate Repair in Hanford
Commercial gate repair in Hanford covers heavier steel gates on apartment complexes, storage yards, and the small industrial buildings along Highway 198. These gates open and close dozens of times a day, which means the wear concentrates in the same places every time: rollers, track, hinges, and the operator chain.
Heavy Swing and Slide Gate Systems
A commercial slide gate riding on a failing roller starts to shudder, then binds, then burns out a motor. We replace rollers, realign track, and tune operators so the gate moves cleanly without fighting its own hardware. Commercial gate repair in Hanford typically runs $300 to $900 depending on gate weight and what has to come apart. The written price you get before we start is the price you pay when the gate runs right.
Operator Diagnostics and Safety Edges
When a commercial operator beeps but won’t move, it’s often a failed photo eye, a pinched safety edge, or a control board that got cooked by valley heat. We diagnose on-site, and we don’t bypass safety devices to force a gate closed. That’s a hard line with us. A live person answers our phone at any hour, and we can schedule commercial work around your tenants’ access needs.
Trusted Brands We Service in Hanford
We’re factory-trained on the openers and operators that Hanford homes and businesses actually run: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. On a ranchette off Grangeville Boulevard, we recently realigned a 16-foot custom steel swing gate and its LiftMaster operator after the original hinge post shifted in adobe clay. Because we carry common LiftMaster and elite parts locally, many Hanford repairs happen the same day rather than waiting on a shipped board. If your opener is from a brand you don’t recognize, call us anyway; if we can’t source the part, we’ll tell you straight.
Common Gate Repair Problems We See in Hanford Homes
- Sagging ornamental gates after a wet winter. Expansive adobe clay swells with winter rain and shrinks in summer heat, moving hinge posts just enough to pull gates out of square. The fix is post-footing reinforcement, not just tightening hinges.
- Faded, heat-expanded iron finishes. Hanford summers with intense sun and dust storms bake the finish off wrought iron, and the heat makes metal components expand. We see paint failure and binding tolerances on gates that face west or south with no shade.
- 1950s-era posts on the older east side. Many of these gates were built with undersized posts set shallow in adobe clay. After winter rains they lean inward and the gate drags on the driveway. We cut out the old post, pour a deep concrete footing with rebar, and realign the gate so it swings clean.
- Automatic opener failures after dust storms. Dust from the surrounding farmland coats limit switches and photo eyes, causing beeping openers that refuse to move. A thorough cleaning and component test usually restores operation without replacing the whole unit.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Hanford, CA
Gate repair in Hanford falls into predictable ranges. A standard latch or lock replacement runs $120 to $260. Hinge and post reinforcement on a sagging gate runs $280 to $650, depending on whether we’re pouring new footings. Gate welding runs $220 to $480 per point. Automatic opener diagnostics and repairs run $180 to $400 when a sensor, switch, or board is the culprit. Full opener replacements run $800 to $2,200 installed, depending on brand and gate weight. Every price is written down and agreed to before any work starts. Call (559) 785-2501 for a free estimate, and we’ll put the exact number in your hand before we touch the gate.
We Also Serve Cities Near Hanford
Our Hanford crews also cover gate repair for neighbors in Lemoore, Kingsburg, Selma, and Visalia. If your property sits outside Hanford proper and you’re wondering whether we’ll come out, call us. Most nearby addresses are within our regular service area, and the written-price promise applies everywhere we go.
Serving Hanford, CA - Our Local Coverage Area
We’re based in the Hanford area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Hanford
The most likely cause is the expansive adobe clay under the hinge post. Hanford’s clay soil swells with winter rain, pushing shallow-set posts out of vertical just enough to drop the latch side of your gate onto the driveway. The durable fix is reinforcing the post footing, not just adjusting hinges. Call (559) 785-2501 if your gate is dragging, and we’ll set up a time to look.
Once a year is right for most custom iron gates in Hanford. An annual service covers hinge lubrication, post-level checks, operator force settings, and a weld inspection. Gates on adobe clay benefit from this rhythm because small shifts caught early cost less than a full post excavation. We can put you on a seasonal schedule if that helps.
Yes. That’s one of the most common jobs we do in Hanford. We pull the leaning post, pour a deeper concrete footing with rebar, set the post, and realign the gate and its hardware. You keep the original ornamental steel, but it finally sits square and swings without dragging. Call (559) 785-2501 and we’ll quote it in writing.
Yes. We cut out the rusted or broken section, weld in a matched piece, and finish it to blend with the original design. For historic homes near downtown Hanford, the match matters visually, and we work to keep it seamless. Pricing depends on the section, but you’ll see the number before we start.
Dust from surrounding farmland coats photo eyes and limit switches, which makes the opener refuse to run. We clean the sensors, test the switch contacts, and check the safety edges. Most of these calls are fixed in one visit. For exact pricing, call (559) 785-2501; the diagnosis is free with the repair.
Get Your Hanford Gate Fixed Right, Today
If your gate is sagging, dragging, or refusing to open, call (559) 785-2501 now. A live person answers, day or night. We’ll schedule a time that works for your household, show up in uniform, protect your floors and entry path, and hand you a written price before any work begins. Every repair is covered by our 365-Day Done Right Promise. If it isn’t right, we make it right. That’s the whole job.
Written by Cody Beckman, Owner at Latch and Post Gate Repair Fresno, serving Hanford since 2009.