Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Tulare
Gate repair in Tulare usually comes down to two things that fail most in this climate: slide-gate rollers and opener electronics. We fix both, same day whenever possible, and we know exactly what the heat and ag dust do to gates around here. If your gate is propped open with a brick right now, that’s a call we can diagnose fast. Reach us at (559) 785-2501 and a live person will answer, day or night.
We’re Gate Repair specialists, not general handymen. Our techs serve Tulare neighborhoods from West Street to Mooney Boulevard, and we carry parts for the legacy openers and welded steel gates this town actually has. Written price before any work starts. Always.
Why Latch and Post Gate Repair Fresno Is Tulare’s Preferred Gate Repair Company
Most of the gates we’re called to in Tulare were installed decades ago, before modern safety edges and photo-eye sensors existed. That’s the work we’re built for. Our technicians know which 1970s Viking and old Elite control boards can be retrofitted, which Mighty Mule openers are worth saving, and when a gate has simply reached the end of its serviceable life. We lay out the honest answer before we turn a wrench.
Every visit includes shoe covers and drop cloths if we step inside your house, whether that’s the kitchen to check a keypad wire or the garage where your opener panel lives. We use pet-safe lubricants where there’s a choice, and we schedule around nap time if quiet matters. Your floors stay clean and your kids don’t get woken up by an air impact wrench. That’s part of how we work, and it’s covered by the Cedarwell C.A.R.E. values: clean up like it’s our own home, ask before we move anything, respect the family’s time, and explain the price before the work begins.
Cody Beckman leads the team you’ll actually talk to, and the 365-Day Done Right Promise covers every repair we make in Tulare. If it isn’t right, we make it right. No argument, no fine print.
Styles & brands we work with
Sliding Gate Repair in Tulare
Sliding gate repair in Tulare almost always starts with the track and rollers. The flat, gridded layout here means lots of wide driveway gates on spacious lots, and after a long summer of 100°F days and ag dust blowing off the fields, rollers seize and the gate binds. We clean the track, replace worn rollers, realign the gate, and then check whether the opener was overworking against all that friction.
Dust-Seized Rollers and Worn Track
Fine dust from surrounding agriculture works its way into sealed roller bearings and grinds them down. By August, we see gates that only move a few inches before stopping. We open the track, pull the gate, and replace rollers with sealed units rated for the dust load we get here. A track section that’s worn unevenly gets corrected at the same visit.
Legacy Operator Repair
Older sliding gate operators in Tulare run hot. Capacitors dry out, control boards fail, and when the motor dies, people start propping the gate open with a brick. We carry retrofit boards for many older Viking, Elite, and Mighty Mule operators, which often makes more sense than replacing the whole unit.
Wrought Iron Gate Repair in Tulare
Wrought iron gate repair in Tulare means dealing with gates that have been standing since Lyndon Johnson was in office. Many homes in the northwest neighborhoods still have their original ornamental iron swing gates, and the posts have shifted with the alluvial soil. We straighten hinges, weld cracks, rebuild sagging corners, and reset posts that have drifted out of plumb.
Sagging Gates and Worn Hinges
A sagging iron gate drags on the latch side and tears up the closer arm. We weld gussets, replace hinge pins, and adjust the gate so it swings true. If the post itself has shifted, we’ll reset it or reinforce it rather than trying to bend the gate around a bad foundation. Standard hinge and realignment work in Tulare runs between $185 and $420 depending on gate weight and post condition.
Rust Repair and Reinforcement
Tulare’s dry heat slows rust compared to the coast, but irrigation overspray and sprinklers aimed at gate posts will still eat through the bottom rail. We grind out rust, weld in new stock, and re-paint where needed. Small rust-through repairs run $95 to $240. If the gate has multiple failed welds and thin bottom rails, replacement is often cheaper than continuing to patch it, and we’ll tell you that straight.
Trusted Brands We Service in Tulare
LiftMaster, FAAC, Viking, Elite, Mighty Mule, DoorKing, Ghost Controls, Linear, BFT. Those are the brands we’re factory-trained on, because those are the brands on the gates Tulare homes actually have. We stock common control boards, photo-eyes, and capacitor kits locally, which means we’re not waiting on a two-week backorder to get your gate moving again. When a 1970s Viking operator from the original subdivision build finally dies, we can usually have the replacement board or unit in hand the same week.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Tulare Homes
- Obsolete control boards failing in the July heat. When temperatures push past 100°F, old operator boards thermal-out and the gate just stops. Homeowners prop the gate open with a brick and call us weeks later.
- Manual slide tracks binding on shifting alluvial soil. Tulare’s soil moves with moisture and dry cycles, which throws old slide tracks out of alignment. The opener then overheats pushing a gate that’s fighting the track every inch.
- Dust-caked safety photocells. The photo-eye lenses get coated with fine ag dust, which triggers ghost reversals or a complete shutdown. Cleaning and realigning usually fixes it, but if the cell is original to a 1970s install, replacement is the better call.
- Worn posts and knife-edged rack teeth. On older slide gates, we regularly see rack and pinion teeth ground into sharp edges from years of a misaligned track. A sharp rack will chew through a new pinion gear in months, so we correct the track and replace the rack section together.
Pricing for Gate Repair in Tulare, CA
Here are honest numbers for what we see in Tulare. Sliding gate roller and track work: $160 to $380. Hinge replacement and welding on a wrought iron gate: $185 to $420. Control board retrofit on a legacy Viking or Elite operator: $280 to $560. Full operator replacement on a standard driveway slide gate: $1,200 to $2,600 depending on the unit and whether the rack and track need replacing too. Standard gate-latch replacements run between $95 and $185. Every job gets a written price before we touch anything, and the number on that sheet is the number you pay. Estimates are free, and there’s no pressure to accept. Call (559) 785-2501.
We Also Serve Cities Near Tulare
Our crews get out to Tulare fast, and the same teams cover Visalia, Hanford, Dinuba, and Kingsburg. If you’re outside the city limits but still in the surrounding ag belt, the same heat and dust problems apply. Same written-price promise, same 365-Day Done Right guarantee.
Serving Tulare, CA - Our Local Coverage Area
We’re based in the Tulare area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Tulare
Because the original rollers were never sealed against fine agricultural dust, and after decades of exposure they bind. The metal also expands in the extreme heat, tightening the clearance between the gate and the track so any dust buildup causes a bind. The fix is replacing the rollers with sealed units and cleaning the track back to true, not lubricating a seized roller. Call us at (559) 785-2501 and we’ll inspect it.
If the operator is the original unit from a 1970s or 1980s install, replace it. Retrofitting an obsolete control board onto a 40-year-old motor rarely saves money once we’re into the second repair. If the gate itself is sound and the track is good, we’ll install a new operator and new safety edges on the existing gate. A new operator runs $1,200 to $2,600 in Tulare, and we’ll quote the exact number in writing first.
Because a brick or block propping the gate tells us the owner has been living with a dead opener for weeks, which means the gate has been dragged manually and the track may be damaged too. We check for that tell before we touch the motor. On a 1970s slide gate near Mooney Boulevard and Cross Avenue, we found the Viking operator dead and the rack and pinion teeth worn into knife edges. The owner had been propping the gate open for weeks. We replaced the operator, swapped the rack section, and realigned the track, no brick needed anymore.
Dust coats the photo-eye lenses and scatters the beam, which makes the safety circuit think something is in the gate’s path. The gate reverses or refuses to move. In bad summers we clean the cells on nearly every call. If cleaning and realignment don’t hold, the cells are old enough that replacement is the reliable fix. Expect $85 to $160 for a pair.
Usually, yes. We weld in gussets, replace hinge pins, and reset posts that have shifted with the soil unless the bottom rail is rusted through in multiple places. If the gate is structurally sound, repair beats replacement every time, even on an iron gate from the 1960s. We’ll show you the welds and the alignment before we leave.
Small problems in the heat become big ones by August. Whether your gate is chained open, propped with a brick, or just scraping across the driveway, call (559) 785-2501 and tell us what you’re seeing. A live person answers, we’ll schedule the visit, and the written price comes before any work. Estimates are free, and the 365-Day Done Right Promise backs everything we do.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Tulare and the Central Valley since 2009.