Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Fresno
When an electric gate stops working in Fresno, it is rarely a small inconvenience. It blocks the driveway, traps a car, or leaves the yard open to pets and kids. Our Electric Gate Repair team handles the common failures we see across Fresno: dead gate motors after a 105°F afternoon, keypads cracked by sun and dust, sagging ornamental iron gates after a winter storm, and swing gates that bind because the post shifted in saturated clay. We work on the brands families here actually own, including LiftMaster, FAAC, Elite, and Mighty Mule. Call us at (559) 785-2501 and a live person answers, any hour, any day.
Why Latch and Post Gate Repair Fresno Is Fresno’s Preferred Electric Gate Repair Company
Fresno gates fail in ways that gates in coastal cities do not. We know the difference because we are part of the Cedarwell family of independently owned and operated gate specialists, and we have worked on Fresno equipment since 2009. Established neighborhoods like Fig Garden and Sunnyside hold hundreds of custom ornamental iron driveway gates mounted on stucco or brick pillars, many with automatic openers installed decades ago. Our background-checked, uniformed technicians are factory-trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and we keep common parts stocked locally so a repair does not wait on a slow freight shipment.
Every visit starts with a written price before any work begins. No pressure, no surprise invoice. Our techs wear shoe covers and lay drop cloths before stepping inside your home or garage, and they photograph the clean-up before they leave. That routine comes from the Cedarwell C.A.R.E. values: Clean up like it is our own home; Ask before we move or touch anything; Respect the family’s time and quiet hours; Explain the price before the work. If the repair is not right, the 365-Day Done Right Promise means Latch and Post makes it right, no argument and no fine print. Cody Beckman, who leads our Fresno team, holds every job to that standard.
Styles & brands we work with
Commercial Gate Operator in Fresno
A commercial gate operator in Fresno works harder than most residential openers because it cycles dozens or hundreds of times a day, often in full sun and blowing valley dust. When a commercial operator fails, it is rarely just the motor. We check the control board, the safety loops or photo eyes, the limit switches, and the hinge and post alignment, because heat and dust attack every one of those parts. A full diagnosis plus a typical single-component repair on a commercial operator in Fresno runs $350 to $900 depending on the part and access. Replacement operators with installation start around $1,400 and go up from there; you will see the exact written number before any work begins.
Slide and swing operator rebuilds
Fresno commercial properties with slide gates see dust pack into the drive chain and rail, which makes the operator pull harder and trip its overload. We clean and re-lubricate the drive, reset the limits, and replace worn sprockets or belts rather than condemning a repairable operator. On swing operators, the bigger problem is usually the post or hinge, not the arm.
Control board and safety device replacement
Dust is the quiet killer of control boards. When fine silt gets inside the cabinet, relays arc, capacitors pop, and the gate starts acting erratically. We replace boards, install sealed enclosures where needed, and verify that photo eyes and edge sensors are clean and aligned so the entrapment protection actually works. Anyone working on a gate operator is dealing with moving iron and live voltage; the safety edges and photo eyes are not optional extras. This is a job for a trained technician, not a weekend fix.
Gate Opener Repair in Fresno
Gate opener repair in Fresno usually starts with one of three symptoms: the gate hums but does not move, the gate moves a few inches and reverses, or the opener trips its thermal protection and quits halfway through the cycle on a 100°F day. Older openers mounted on brick or stucco pillars absorb heat all afternoon and can overheat internally even when the motor itself is fine. A typical gate opener repair in Fresno runs $180 to $380 for most component replacements, including gear kits, capacitors, limit switches, and receiver boards. If the opener is beyond repair, a new residential opener installed usually lands between $850 and $1,900 depending on the brand and gate weight.
Overheating and thermal trip fixes
When an opener overheats, the first thing we check is whether the gate itself is binding, because a stiff hinge or a shifted post makes the motor work harder and generate more heat. We correct the mechanical drag first, then check the internal cooling and capacitor health. Sometimes the fix is a new capacitor and a cleaned cabinet; sometimes the opener is simply undersized for the gate and needs replacement.
Receiver board and remote logic repair
If the remote worked yesterday and does not work today, the problem is usually the receiver board, the remote battery, or the antenna wire. We bench-test the board, replace it if needed, and reprogram remotes and keypads on site. We also reset the opener’s force and travel limits after any repair so the gate does not slam or stall at the end of its swing or slide.
Trusted Brands We Service in Fresno
We are factory-trained on the equipment Fresno homeowners and property managers actually run: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters because a LiftMaster control board pairs differently than a FAAC board, and a Mighty Mule arm adjusts differently than a Viking arm. We stock common boards, remotes, photo eyes, and gear kits locally so most Fresno repairs go out the same day they are diagnosed. If a part is not on the truck, we know exactly which local supplier carries it, and we will tell you the honest lead time before we order anything. Our focus stays on the latch that holds the gate and the post that carries it; every gate comes down to those two things.
Common Electric Gate Repair Problems We See in Fresno Homes
- Wind-bent hinge posts and shifted footings. Solid infill gates act like sails in a strong valley wind. After a storm, saturated clay lets the post lean, the gate sags, and the opener strains. We see this most after winter rain in Fig Garden and other mature Fresno neighborhoods.
- Dust-clogged photo eyes and erratic safety behavior. Summer dust storms blow fine silt onto the photo eye lenses and into the opener cabinet. The gate then reverses for no apparent reason, or refuses to close, and most people think the board is bad. Usually it is just dirty or blocked optics and a brief inspection sorts it out.
- Overheated openers on stucco and brick pillars. A black metal opener box in full Fresno sun can exceed 140°F inside. Thermal protection trips, and the gate stops mid-cycle until the unit cools. We correct binding, improve ventilation where possible, and replace heat-damaged capacitors and boards.
- Tower District pivot posts rusted at the base. In the Tower District especially, decades of flood irrigation have left many original pivot posts corroded underground. The chain-link fabric gets replaced over the years, but the rusted post base keeps failing, and the gate starts scraping or leaning. This is a uniquely Fresno failure mode we rarely see in Clovis or Madera.
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in Fresno, CA
Straight numbers, because that is what you called to find out. A service call and diagnosis in Fresno typically runs $85 to $125, which is waived when you approve the repair. Common fix-it jobs: gate opener repair $180 to $380, safety sensor or keypad repair $120 to $240, control board replacement $250 to $550, and a full residential opener replacement between $850 and $1,900. Commercial operator work starts around $350 for a single-component repair and runs higher for full operator swaps. What moves the number is the gate weight, the opener brand, and whether the post or hinge needs mechanical correction before the electrical work can hold. You will see the exact figure in writing before we touch anything. Call (559) 785-2501 for a free estimate, and we will quote the job honestly, no pressure.
We Also Serve Cities Near Fresno
Our Fresno-based crews regularly run repairs out to the surrounding communities as well. If you are in Fresno, this is home turf and we can often reach you the same day. We also cover Clovis, Madera, Sanger, and Fowler, with the same written-price policy and the same 365-Day Done Right Promise on every gate we repair.
Serving Fresno, CA - Our Local Coverage Area
We’re based in the Fresno area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Fresno
Most Fresno gates have a manual release mechanism, usually a keyed release on the operator or a pull-handle near the motor; turn the key or pull the handle to disengage the drive and then push or pull the gate by hand. For safety, be careful of the gate’s weight and pinch points while it is in manual mode, and re-engage the drive once power is restored. If you cannot find the release or the gate will not move by hand, call (559) 785-2501 and we will walk you through it or send a technician.
Heavy rain saturates Fresno’s heavy clay soil and the water creates a soft pocket around shallow post footings, allowing the post to lean under the gate’s weight and wind load. Older ornamental iron gates in Fig Garden and the Tower District often have footings that were undersized or set in clay that expands and contracts with moisture. We dig out the base, set a new deeper footing, and re-align the gate before the opener is reconnected.
Yes, in most cases we can repair the hinges, correct the post alignment, or weld a cracked frame member and save the original gate. We start by finding whether the sag is coming from the hinge side, the post side, or a broken weld in the gate frame itself. If the post is rusted through at the base, we replace the post and set a proper footing rather than replacing the entire gate.
Fresno’s sustained 100°F+ heat heats the opener cabinet, and a binding gate or stiff hinge adds enough load to push the motor into thermal protection. The prevention is regular cleaning of the opener internals, checking that the gate swings freely without drag, and making sure the opener is sized for the gate’s weight and sail area. We can add ventilation, replace heat-degraded capacitors, and re-lubricate hinges with heat-stable lubricants so the gate runs cooler.
Every 12 months is the right interval for most Fresno residential electric gates, and twice a year is smart for commercial operators that cycle all day in dust and sun. The service should include cleaning photo eyes, checking and lubricating hinges and drive chains, tightening bolts, testing the safety edges and entrapment protection, and inspecting post and hinge integrity. This is the most effective way to catch a Tower District rust problem or a heat-damaged board before it leaves you stuck outside the gate. Call us to schedule and we will quote the service before we start.
Call Latch and Post Gate Repair Fresno for a Free Estimate
If your electric gate is stuck, sagging, or just acting up, call us at (559) 785-2501. A live person answers around the clock, no voicemail queue. We will give you a written price before any work begins, and our teams leave your driveway, floors, and gate area as clean as we found them, with a photo to prove it. The 365-Day Done Right Promise covers every repair and installation. That is the standard Cody Beckman and the whole Fresno crew work to on every gate, every day.
Written by Cody Beckman, Owner at Latch and Post Gate Repair Fresno, serving Fresno since 2009.